Drivers are required to dim their headlights when approaching an oncoming vehicle within 500 feet or when approaching the rear of a vehicle
within 300 feet
.
How far back do you dim your headlights before approaching a vehicle from the rear?
If you are driving with your high-beam lights on, you must dim them
at least 500 ft
from any oncoming vehicle, so you don’t blind the oncoming driver. You must use low-beam lights if you are within 200-300 ft of the vehicle you are following.
What distance are you required to dim headlights?
If you are driving with your high-beam lights on, you must dim them
at least 500 ft from any oncoming vehicle
, so you don’t blind the oncoming driver. You must use low-beam lights if you are within 200-300 ft of the vehicle you are following.
At what distance must headlights be dimmed before meeting an oncoming car or when coming from behind another vehicle?
Your headlights only let you see about 350 feet ahead. Be sure you are driving slow enough to stop or turn if needed. Use your low beams when you come
within 500 feet
(about one block) of an oncoming vehicle. Also use your low beams when following another vehicle within 300 feet.
When approaching another vehicle at night from the rear you should dim your headlights when you are at least?
If you are driving with your high-beam lights on, you must dim them at
least 500 ft from any oncoming vehicle
, so you don’t blind the oncoming driver. You must use low-beam lights if you are within 200-300 ft of the vehicle you are following.
Where should you not hoot?
- Near hospital.
- Near school.
- Near law court.
- Where there is NO hooting sign.
When meeting a vehicle with blinding headlights you should?
Dim your light and speed up to pass quickly. If a vehicle is coming toward you with its high beams on, look away from the headlights and
glance toward the right side of the road until the car has passed
. This will keep you from being blinded.
Is it safe to use your bright headlights if there is a car ahead of you within 300 feet?
Don’t use high-beam headlights within 500 feet of oncoming vehicles. If you are behind other vehicles,
use low beams when you are within 300 feet of the vehicle ahead
. When leaving a brightly lit place, drive slowly until your eyes adjust to the darkness. Don’t look directly at oncoming headlights.
What do you do to avoid the glare from oncoming headlights?
When faced with an oncoming high beam,
look down toward the right side of the road
to avoid the glare. However, do not completely take your eyes off the road. By slightly lowering your line of sight, you should still be able to see the lines on the road and stay in your lane until the car causing the glare passes.
When meeting a vehicle at night with one headlight you should?
The law is also known as the “Compulsory Insurance Law”. When meeting a Vehicle at night with one headlight, you should? 1.
Stop where you are until the vehicle passes.
How do you know if you’re driving too slowly?
- Are driving below 35 mph at any time.
- Are driving below the posted speed limit.
- Block traffic driving at a normal and safe speed.
- Have someone following you too closely.
When meeting an oncoming vehicle at night you might avoid being momentarily blinded if you?
| Term You can avoid conflicts while driving in heavy urban traffic if you Definition Focus your attention on driving | Term When meeting an oncoming vehicle at night, you might avoid being momentarily blinded if you Definition Glance at the right edge of the road |
|---|
Why does everyone drive with their high beams on?
When should I use my high beams? High beams are
designed to provide better visibility when driving in rural areas where street lights
aren’t common. You should use your high beams if you’re driving at night and you aren’t within 200-300 feet of another driver.
Which are the four common mistakes made when approaching a roundabout?
- Entering a roundabout without yielding to oncoming traffic. Yield signs are clearly posted to help prevent collisions. …
- Crossing a lane of traffic to get to your exit. …
- Stopping in the middle of a roundabout for no apparent reason.
When can you put on the lights during the day?
Daytime headlight use is highly recommended (and sometimes required) during adverse weather conditions, such as fog, smoke, rain, snow, sleet, or when
visibility is less than 500 feet
. Turn on your lights whenever you see a “daylight headlight section” sign.
