Acoustimass 6 systems are 5.1 speaker systems that are fully compatible with multichannel digital and analog surround sound receivers and amplifiers rated 10 to 150 watts per channel, and rated 4 to 8 ohms. ... Basically you need a 5.1 Surround receiver with an RCA Sub output.
Can Bose Acoustimass work with any receiver?
Q&A: I Have A Bose Acoustimass 10 System, What Receiver Should I Buy? The Bose Acoustimass 10 5.1 system. ... A: Glancing at the specifications of the Bose Acoustimass 10, the system is stated to be compatible with A/V receivers and amplifiers rated from 10-200 watts per channel , and from 4 ohms to 8 ohms.
What receiver goes with Bose Acoustimass?
The Yamaha RX-V685 is definitely one of the best AV receivers that you can go for to match with your Bose Acoustimass 10.
How do I connect my Bose Acoustimass 6 to my receiver?
Use the 50 foot (15 m) surround speakers cable with two pairs of wires to connect the Acoustimass module to the left and right surround cube speakers. Use the 20 foot (6 m) system input cable with five pairs of wires to connect the Acoustimass module to the outputs on the receiver.
Can we use Bose speakers with another brand receiver?
Can I connect my Bose speakers to another receiver? You can connect your Bose speakers to almost any receiver . However, choose one to match the sound quality of your speakers.
Can I use Bose speakers without the Acoustimass module?
Bose cubes are not full range speakers. You can't use them without connecting to a Bose Acoustimass module.
Does the Bose Acoustimass need a receiver?
The Bose Acoustimass 10 series is purely a surround sound speaker package. Therefore, they need a separate amplifier/receiver to power them . This is ideal if you already have an AV receiver, but is obviously an added cost if you haven't.
How do I connect my Bose subwoofer to my receiver?
If you have Bose Subwoofer and third party satellite(surround) speakers, you can bypass subwoofer and connect satellite(surround) speakers to receiver directly . This custom built cable provide a low cost solution to connect your Bose subwoofer to receiver. ... RCA plug goes to receiver subwoofer output.
Do I need a receiver for Bose Acoustimass 6?
Acoustimass 6 systems are 5.1 speaker systems that are fully compatible with multichannel digital and analog surround sound receivers and amplifiers rated 10 to 150 watts per channel, and rated 4 to 8 ohms. ... Basically you need a 5.1 Surround receiver with an RCA Sub output .
What ohms are Bose speakers?
The Bose Acoustimass 6 speaker system is compatible with both 4 ohm and 8 ohm impedance receivers . The Acoustimass module is a hub for all the speaker input from your surround sound receiver, which it then pipes out to the individual speakers.
How do you connect regular speaker wire to Bose speakers?
A Bose speaker adapter can convert the plug so standard speaker cables can be used with another receiver. Insert the plug on the end of a Bose Lifestyle speaker cable into the matching jack on a Bose speaker adapter. Strip 1/2 inch of insulation off each of the two strands on one end of a speaker wire.
How do I hook up my Bose surround sound?
- Connect either the bass module or surround speakers to power.
- On the remote control, press the SoundTouch button.
- Press and hold 7 on the remote until the connectivity indicator on the soundbar blinks white.
Where does the Bose Acoustimass module go?
Bose® recommends putting your Acoustimass module at the same end of the room as the television monitor . To prevent interference, keep the module at least 2 feet (60 cm) from the television. You may hide the Acoustimass module behind or under furniture, but do not block the opening.
What does the Bose Acoustimass module do?
The powered Acoustimass module adds a big assist to the small cube speakers by providing deep, low notes . Whether it's a haunting score or an oncoming storm, you'll feel the realistic effects at any volume level, without audible distortion.
Can I use Bose subwoofer without speakers?
No, you can't do that . The Bose bass unit is actually the power amplifier for the entire system, and the audio input is full range.
