Straighten any kinks along the hose that drains water from your DishDrawerTM
. If the kinks return, you may need to replace the hose. Clean the filter plate/drain filter. Aim to clean your DishDrawerTM at least once per month, including the drain filter plates.
How do you clear the f1 code on a Fisher and Paykel dishwasher?
- Locate the drain-access filter panel on the bottom of the drawer.
- Remove the rack that sits above it.
- Pull up to lift the drain filter and remove it from the machine.
- Set the filter under the faucet to rinse it clean with cold water.
- Reinstall the filter and confirm that it sits flush with the bottom of the DishDrawer.
How do you reset Fisher and Paykel dish drawers?
- Press and hold the button decorated with the key and lock image for five seconds. …
- Press the power button to turn off power to the Fisher & Paykel dishwasher.
- Wait a few minutes and then press the power button to restore power.
How do I clear error code Fisher Paykel?
- Press to stop the beeping. Press. again to turn the dishwasher off.
- Wait a few seconds. Press. again to turn the dishwasher back on.
How do you drain a Fisher and Paykel washing machine?
How do you drain a dishwasher?
- Step 1: Prepare Your Dishwasher. …
- Step 2: Make Sure Your Dishwasher is Turned Off. …
- Step 3: Remove the Stagnant Water With a Towel. …
- Step 4: Perform a Check On the Drain Hose. …
- Step 5: Remove Drain Hose and Clean. …
- Step 6: Check Dishwasher Drain.
How do you clean a Fisher Paykel DishDrawer?
How do I cancel my Fisher Paykel dishwasher drawer?
To cancel,
press and hold until the light above it goes out
. Childlock locks the drawer and disables all the buttons, preventing unauthorized use by children. To activate, press and hold until you hear two beeps (5 seconds). The light above the button will glow steadily.
How do you remove a Fisher Paykel double drawer dishwasher?
What does F1 error mean?
F1 Error. The F1 error means that
there is an electronics failure within the oven
. This failure can occur within the keypad itself, the electronic oven control or the oven temperature sensor.
What does F2 mean on my Fisher and Paykel dishwasher?
F2.
Motor Rotor Fault
. There may be debris or broken glass in the Rotor. try removing and cleaning, if this doesn't work then You will require a Service Technician to assist – Click Here to schedule a visit.
What does E9 mean on Fisher and Paykel dishwasher?
| Fault Code Possible Cause of Fault | E6 Fault with the drying fan. | E7 Electronics fault—detergent dispensing system. | E8 Electronics fault—other systems. | E9 Electronics fault—controller. |
|---|
How do I read a Fisher and Paykel error code?
What does FCO mean on a Fisher and Paykel dishwasher?
| Error Codes Problem | FCO Motor fault. Switch dishwasher OFF at the power supply. Wait a few moments and switch ON again. If the fault persists, turn water off and disconnect from the power supply. Call Customer Care. |
|---|
How do you manually drain water from a washing machine?
- Step 1: Turn off the power and lay down towels. …
- Step 2: Locate the drain hose at the back of the washing machine. …
- Step 3: Drain the water. …
- Step 1: Turn off the power and lay down towels. …
- Step 2: Locate the drain hose. …
- Step 3: Drain the water. …
- Step 4: Scrub the filter.
How do you manually drain an automatic washing machine?
If your washing machine has one, it will be behind a small flap in the back wall of the washer. Underneath the flap will be a small drain hose.
Place a bucket underneath the drain hose then pull the stopper out of it to allow the water to drain
. The water will drain slowly as it filters through.
Why won't my washer drain all the way?
Your washer may have a clogged drain hose or the pump may be broken
. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed. Whatever the reason, the water will need to be drained from the washing machine before any work or diagnosis can be done.
How do you drain a dishwasher with standing water?
Mix together 1/2 cup of baking soda and 1/2 cup of water to form a paste. Pour the paste into the drain line through the filter screen. Pour 1/2 cup vinegar down the drain line and let the solution set for 15 minutes. After 15 minutes, pour hot water down the drain line to flush out the baking soda solution.
Where is the dishwasher drain pump?
Most dishwashers have a “Cancel” or “Drain” button or option
. Sometimes this will be two buttons pressed at the same time, which should be noted on the control.
How do you clean a DishDrawer dishwasher?
Clean your Fisher & Paykel DishDrawer by
taking a bowl filled with a couple cups of white vinegar and placing it in the middle of your DishDrawer
. Run it through a normal cycle without any detergent, so the vinegar gets dispersed throughout, leaving your dishwasher smelling and looking like new.
How do you clean dishwasher drawers?
Fill the bowl with 2 cups of white vinegar. Then place the bowl in your dishwasher drawer. The vinegar will remove any buildup from the inside of your dishwasher drawer. Add a packet of powdered lemonade (Kool-Aid or other brand) to the soap component of the unit to give your dishwasher drawer a clean citrus smell.
Why is my Fisher and Paykel dishwasher not cleaning?
Try removing, rinsing, and cleaning the spray arm as per ‘Care & Cleaning' in your User Guide
. Aim to clean your dishwasher at least once per month, including the drain filter plates. Refer to the ‘Care and cleaning' in your User Guide for instructions.
How do I stop my dish drawer?
To cancel:
press and hold until you hear another tone and the keylock indicator stops flashing and goes out
. together until you hear another tone and the keylock indicator stops flashing and goes out. Off/On Press to turn the dishdrawer on or off.
How do you unlock a Fisher Paykel dishwasher drawer?
Closed drawer auto-lock is on
This keeps the drawer locked even after your DishDrawerTM has powered off. Unlock by
powering your DishDrawerTM back on
(unless Keylock is activated, see above). Press any button and open drawer within 30 seconds.
How do I stop my Fisher Paykel dishwasher mid cycle?
Press START/PAUSE to resume
if a power cut or water failure has caused your washer to stop mid-cycle. If a user warning or fault code is displayed, refer to ‘Fault Codes' for further information.
