As long as it’s all oil based you should be able too
. But if it’s a solid color stain it might turn a little transparent if mixed with the sealer…..just give it a try on a scrap piece. Bingo. As long as they use the same solvents, it should be fine.
Can you tint wood sealer?
Wood Tints. … All of our colors can be added to our wood sealers for a sophisticated finish, including NANO, NANO+POLY, EXOTIC, and MARINE. Tints are made for 1 gallon of sealer, so order 1 per gallon.
Can Thompson Water Seal be tinted?
SEARCH RESULTS. Thompson’s WaterSeal Waterproofer Plus Tinted Wood Stain Check out Thompson’s WaterSeal Waterproofer Plus Tinted Wood Stain & explore all our waterproofing products. … All Waterproofing Stains prevent water damage, while the coating resists mildew and UV damage.
What colors does Thompson’s water Seal come in?
- Acorn Brown.
- Woodland Cedar.
- Harvest Gold.
- Maple Brown.
- Sequoia Red.
Is Thompson water Seal any good?
Overall Score Thompson’s
®
WaterSeal
®
at 2 Year Period: 6.125
– Overall Thompson’s® WaterSeal® Clear Plus wood finish is a “
clear” disappointment
. Any finish that offers zero ability to prevent UV graying should not be considered for your deck or exterior wood.
Can you tint water sealer?
Both
solvent- and water-based sealers can be tinted
, depending on what you are trying to achieve. Some manufacturers offer pretinted sealers, while others provide tint concentrates in a wide array of colors that you can mix into a clear sealer at the jobsite.
Do you seal or stain wood first?
The key is to
apply a thin base coat to partially seal the wood before wood staining
. Sanding sealers, dewaxed shellac and wipe-on finishes will all do the trick.
Should I stain or seal my deck?
A: It’s really up to you.
Just staining the deck will give you
the color you want, although in high-traffic areas the stain could wear away quickly. … The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.
Can I tint polyurethane with paint?
While
you can tint clear polyurethane with paint
, there is no exact guide for how much color to add to get the effect you want. … As another option, you could paint as usual with an oil-based paint and then let that only mostly dry before immediately adding your polyurethane coating.
How many coats of Thompson water Seal do I need?
One coat is enough
, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson’s
®
WaterSeal
®
Waterproofing Stains, you can clean your tools with soap and water.
How long does Thompson water Seal last?
If applied correctly, Water Seal will last
up to 4 years
. This is dependent on conditions such as orientation of the wall and local climate.
What is the best way to apply Thompson’s Water Seal?
The fastest way to apply is with a
pump-up sprayer
(using a coarse setting), but you can also apply with a brush or a roller. You should apply liberally. In the case of areas with heavy discoloration or dirt, apply a second coat, brush lightly with a broom and hose off.
Should I use Thompson Water Seal on pressure-treated wood?
Although the wood is resistant to rot and insect attacks because of the pressure treatment, it can warp, split and develop mildew if not protected from the effects of water. … The directions for some, such as Thompson’s Water Seal, specify
pressure-treated wood
as a suitable use.
What is the longest lasting deck sealer?
Q. What is the longest-lasting deck sealer? An oil-based deck sealer, such as
Rust-Oleum Ultimate Spar Urethane
, will protect a deck for up to 5 years.
How long does tinted concrete sealer last?
Decorative concrete sealers including tinted sealers have the shortest longevity among all kinds of concrete sealers, decorative sealers last
6 months up to 3 years
depending on the environment and how well the concrete is cared for.
