2018 36mm FLOAT forks can be travel adjusted by replacing the air shaft assembly . 36mm FLOAT NA2 forks can be reduced in travel as low as 100mm (831 air shaft).
Can you shorten a forks travel?
Yes, your a2c will change by whatever you reduce the travel by . The spring rate will also be affected so you will have to add a few more psi to achieve the correct sag (according to the Fox link below). Keep in mind that reducing the travel will also change the geometry of your bike. Take a look at the link below.
Can you reduce the travel of a FOX fork?
To shorten travel you will need one Neg Plate Spacer (PN: 234-04-627) for each 10mm reduction in travel desired . 2015-2017 36 FLOAT 170mm and 180mm forks can be reduced in travel down to 130mm. 2015-2017 36 FLOAT 160mm forks can be reduced in travel down to 110mm.
Can you change FOX 38 travel?
Fox’s 38 Float air shaft allows you to adjust the travel of your fork to suit the bike you’re installing it on .
How do I add more travel to my fork?
Can I put 150mm forks on a 120mm bike?
If you are one who likes to test things and push boundaries and if the frame was no longer of any value to you using a 120mm fork, you could give the 150mm a go and see what happens. But just be ready for the worst to possibly happen. It is possible, nothing will prevent you from doing so .
Can you adjust travel on FOX 36?
Supplies Needed. 2018 36mm FLOAT forks can be travel adjusted by replacing the air shaft assembly . 36mm FLOAT NA2 forks can be reduced in travel as low as 100mm (831 air shaft).
Can you change FOX 34 travel?
Please note: 34mm FLOAT forks can be travel adjusted by replacing the air shaft assembly . 34mm forks can be reduced in travel as low as 110mm. 2016 27.5in 34mm forks may have travel extended up to 160mm.
Can you increase travel on FOX 34 rhythm?
Confirmed by Fox directly via phone conversation today, The 2017 29er (or 27.5) Rhythm can have the travel changed by changing air shaft assemblies . The highest the 29er will go is 130mm. They said the 2017 and 2018 Rhythm part numbers are the same.
How do you shorten a suspension fork?
How do you adjust a Fox 38?
How do I lower my fork mountain bike?
How do I change my Fox 34 fork?
What’s the difference between Fox 34 and 36?
How do you measure Fox forks?
Use a zip tie around the stanchion to make the measurement. Push the zip tie down to the wiper seal and then compress the fork all the way . This is your total travel. Then fill the fork to your regular pressure, push the zip tie back down to the wiper, and go ride your favorite trail.
Is 150mm travel too much for a hardtail?
Those roots and rocks can ping you offline, despite being sure of your steering inputs. Too much travel can also dull the feedback of your trail bike. We recommend that a trail fork ideally have 34mm stanchions, at 130-140mm, for a 29er – possibly, up to 150mm, for the smaller 27.5in wheel size .
How much does fork travel affect reach?
Bumping the fork travel up by 20mm, to 150mm, will slacken the head angle by approximately 1° and increase the front centre measurement by 10mm .
How does fork length affect handling?
Longer offset results in less trail, which makes for a lighter but twitchier steering feel . Conversely, shorter offset forks increase the trail, which makes for more stable, heavier steering especially in steep corners or bumpy sections.
Can you put a 130mm fork on a 100mm bike?
at 130mm you’ll probably be fine, I wouldn’t put anything bigger on there . The kona frames are pretty strong, I used to run a 130mm fork on my 100mm jump bike for AM and a lottle more FR riding, I was fine.
Can I put 130mm forks on a 120mm bike?
Nope. It will be fine and will take more than 10mm to make an appreciable change . You might notice the handling difference, but it will be slight and won’t negatively affect anything.
What does 150mm travel mean?
150mm – 160mm Travel: “All Mountain” Bikes
Around 150-160mm travel is generally what bike companies are calling “All Mountain” bikes. These are designed to go down rough trails quickly, while still maintaining at least some degree of uphill friendliness .
How do you adjust a FOX 36 fork?
Low-speed compression adjustment is useful to control fork performance during rider weight shifts, G-outs, and other slow inputs. FOX recommends turning adjusters fully clockwise until they come to a gentle stop (approximately 2 in-lb/ 0.2 Nm torque) then turning counter-clockwise to the recommended setting .
