Can You Lay A Patio On An Old Patio?

Any type of paver is appropriate for use

when covering up an old patio, as long as the stones fit together and create a tight surface. This includes flagstone, brick or natural paver stones; however, if you plan to use mortar, bricks should not be used if the existing surface is asphalt.

Can you slab over existing slabs?

You could break the slabs with a sledge hammer to further compact if you feel subsidence is a problem and then cast a solid, steel reinforced concrete pad over the whole area, building off this if the finished levels allow this raise in height.

Can you lay a patio on existing concrete?

With proper installation,

concrete pavers can be installed over existing poured concrete slabs

if they’re in relatively good condition. This is known as an overlay, and it can be a great, affordable option for many homeowners.

Can you add to an existing patio?

Pouring additional

concrete

can get expensive. … An alternative to pouring more concrete is extending the concrete patio with pavers. Patio pavers offer homeowners many benefits. They are easy to install, so homeowners can make the extension of a concrete patio a weekend do-it-yourself project.

What can I put over my old concrete patio?

Cover an old concrete patio with

a wood or composite deck

to bring a warm, organic look to the backyard. Build the new deck with wood or composite decking and attach the deck directly to the concrete patio.

What can I do with old patio slabs?

There are also plenty of ideas online for reusing slabs, such as breaking them up and using them as jigsaw-style paths, fixing them

together as makeshift plant pots

or using them as BBQ borders (depending on the size).

Can I use old slabs as sub base?

A sub-base of 75mm hardcore will be installed and compacted on the former raised area and each slab will be laid on a full bed of mortar to an approximate depth of 50mm this will ensure the strength and longevity.” …

What sub-base should I use for patio?

‘ The most common granular aggregate sub-base is

DoT (Department of Transport) Type 1 and Type 3 Limestone

. They are both crushed stone: Type 1 has a maximum permitted top size of 63mm, graded down to dust; and Type 3 is an open-graded 40mm unbound mixture with a reduced amount of fines.

How can I make my paving slabs look better?

To create our patterned look, simply

stain different slabs with the different shades in an alternating pattern

. Or you can apply a mix of shades to the same slabs by layering them on until you’ve got the shade you’d like. If you’d like a darker stain, just add more coats.

How do you lay a patio for beginners?

1. Dig 150mm into your patio area.
2. Lay a compacted sub-base of 100mm.
3. Cover the area with 40mm of concrete mix.
4. Lay paving slabs 15mm into the concrete with a 10-15mm gap.
5. Leave to set for at least 24 hours.
6. Fill the gaps between the paving slabs with concrete mix.

How do you lay paving slabs on an existing patio?

1. Mark the area.
2. Dig a bed that’s 105mm deep.
3. Add a 50mm sub-base layer.
4. Mix the concrete – one part cement to six parts ballast.
5. Add a 30mm layer of concrete mix.
6. Lay the paving slabs, leaving 8 to 10mm spaces between them.
7. Fill the joints with the mortar mix.

How do you Slope a patio to a house?

A patio should slope away from the house at the rate of

1/8′′ (3mm) per running foot

. Generally, a 4′′ (100mm) thick slab set 2′′ (50mm) above ground level is suitable. To ensure that the height and slope are correct, begin the excavation, layout and form construction where the patio meets the house.

What is the cheapest way to cover a patio?

1. Expenses.
2. #1: Buy a Shade Sail or Shade Cloth.
3. #2: Wood Frame with Translucent Cover.
4. #3: Build a Palapa.
5. Build a Concrete Patio Cover That You Love.

How do you stain an old concrete patio?

1. Dampen the area with water but do not let it puddle.
2. Spray in an overlapping manner, maintaining a wet edge.
3. Allow acid stain to react with the concrete floor for at least 6-hours.
4. Clean residue and pour water on floor to approximate the final color.

Is it better to paint or stain concrete patio?

For the ultimate in long-lasting, durable color, choose

concrete stain

. Because concrete stain doesn’t just sit on the surface of the concrete, but actually penetrates into the pores of the concrete to some degree, your color is not going to peel, chip, or flake.