Can you restring Worx trimmer? The diameter of this line is approximately
0.065”
. The line is pre-wound on spools specially designed to work on Worx 20V and 32V battery operated trimmers.
What size line does the Worx trimmer use?
The diameter of this line is approximately
0.065”
. The line is pre-wound on spools specially designed to work on Worx 20V and 32V battery operated trimmers.
How do you replace the wire on a WORX trimmer?
How do I extend my Worx Trimmer line?
Why does my Worx Trimmer line keep breaking?
The line breaks repeatedly creating a VERY frustrating ordeal. The reason…
the cord is not wound evenly about the spindle, consequently the auto release feature does not work properly
. Hence, the line does not advance and breaks inside the spindle. Save yourself and buy the cord and wind it yourself.
How do you use a Worx string trimmer?
Where is the model number on a WORX trimmer?
How do you put trimmer line on?
How do you turn the Worx trimmer into an edger?
How do you wrap a trimmer line?
Can you reload Worx trimmer spool?
How do you clean Worx grass trimmers?
Wipe the trimmer parts down with a rag after use and before storing it. Do a deeper cleaning with a stiff brush and a damp cloth periodically. Use cotton swabs, lightly dampened with machine oil to clean exhausts and intakes and other hard-to-clean areas.
Can you use any strimmer wire?
You can normally fit thinner strimmer line into you strimmer too
. So for example if you have 2.4mm requirement, you can probably fit 2mm but I highly recommend using the correct gauge for safety and product efficiency.
Why does my trimmer line melt together?
Trimmer line can melt together because of several reasons, here are a few.
Heat created by continually trimming around fences, and or bricks
. Take breaks and feed line often. Heat created by continually trimming around concrete and or asphalt.
How do I stop my Trimmer line from breaking?
- Check the quality of the trimmer line you’re using.
- Check your trimmer line is thick enough.
- Be careful around hard surfaces.
- Make sure your line is not past its best (old).
- Make sure the trimmer line (+trimmer) is designed for the trimming you’re doing.
Where are Worx tools made?
Now, remember that Worx is owned by the Positec Tool Corporation, and yes, they make all of their products in
China
. Although you might be worried about tool quality issues due to the location of manufacturing, most would agree that Worx tools are some of the better ones to come out of China.
How do you remove the head of a WORX trimmer?
How does the Worx work?
How do I find my Worx model number?
- Warranty Statement. …
- Terms. …
- Product registration.
What is the difference between WA0004 and WA0010?
You can find spools that fit the WG124 here. What’s the difference between this and the Free Spools For Life package (WA0010)?
This model (WA0004) is a two-pack of spools
. Our Free Spools for Life package (WA0010) is a benefit for customers who have taken advantage of a special TV or internet offer from Worx.
Where is the serial number on a Ryobi string trimmer?
Where can I find the model number and serial number of my Outdoor Product? Information on your RYOBI product can be found
on the black label located directly on your tool
. Your serial number can be found on this label and may begin with CS, OA etc. Your model number will either begin with a RY or a P or AC (accessory).
How do you refill a line spool trimmer?
How do you wind a string trimmer?
How do you use a Worx electric edger?
How do you put wheels on a WORX trimmer?
How do you assemble a Worx cordless hedge trimmer?
How long should the trimmer line be?
The length to which the lines should be cut also varies, from around
10′ to 25′
. If you are not sure, err on the side of too long; you can always cut it shorter later. Both lines should be cut to the same length. Make sure your trimmer’s engine is turned off.
How do you advance a string on a Ryobi trimmer?
Can you wash string trimmer?
How long should a gas trimmer last?
Given the Stihl track record for producing quality products, we know that you can expect a trimmer to last for at least
2 years
for gas powered models and 3 years for battery operated machines.
Does it matter what trimmer line you use?
This probably comes as no surprise to anyone, but the general rule with string trimmer line size is that
the tougher the application, the thicker the line needs to be
. A larger diameter line increases the power and durability of the line, which leads to less breakage and wear-out.
What else can you use instead of strimmer wire?
What trimmer line is best?
- 2.1 Husqvarna Titanium Force.
- 2.2 Echo Cross-Fire Line.
- 2.3 Oregon Magnum Gatorline Square Trimmer Line.
- 2.4 A ANLEOLIFE Commercial Square String Trimmer Line.
- 2.5 Copperhead Vortex Trimmer Line.
- 2.6 Cyclone Commercial-Grade 6-Blade Trimmer Line.
- 2.7 DEWALT String Trimmer Line.
Are you supposed to soak trimmer line in water?
Trimmer line does tend to dry out over time and becomes more brittle.
Storing it or soaking it in water will help reduce line breakage and make the line more flexible
. Be sure to deplete your supply of last year’s line before you purchase new line and begin using it.
Is Thicker trimmer line better?
Low-voltage (up 24 volts) and small gas-powered trimmers (20 cc) work best with medium or small-sized trimmer lines.
Thicker lines need more powerful engines that spin fast enough for the trimmer lines to cut through grass and weeds
.
Does trimmer line get brittle with age?
During winter storage, trimmer line can age, become brittle or dry
. This may result in poor working performance in the first spring cut. Trimmer line that has lost moisture due to extended storage can be submerged in water overnight. This may help revitalize the line and improve its life and performance.
