Do I need delay and reverb? If you just want a fuller sound for recording and live purposes, and your amp doesn’t feature reverb (or has a poor quality one, which is quite common), then the reverb pedal is your best bet.
If, however, you want to be more experimental, or just want to make your solos sound cool, then go for the delay pedal
.
Should I get reverb or delay?
Next time you’re in the studio, visualize the kind of sound you wish to get.
If you are looking to replicate the ambient sounds of a specific setting, reverb is your go-to effect
. If it’s a varying, creative delay you are looking for—with no additional support or ambiance—switch-on delay, and dial in the settings.
Should you put reverb on delay?
If reverb is muddying the mix, use delay
Adding reverb to every track in a mix is a common mistake. Your mix will sound muddy and listeners won’t be able to hear details of instruments, making for an ear-fatiguing listen. Reverb can also be distracting when applied carelessly to a single instrument.
Do I need a delay pedal if my amp has reverb?
Should you use reverb or delay on vocals?
It will give them more fullness and sustain, and will have a more “natural” sound to them. BUT reverb will also push the vocals back in the mix. It can cause them to lose energy and cohesion, because it overlaps the words and washes them out. Delay, on the other hand, won’t push your vocals too far back!
Why do guitarists use delay pedals?
Usually this playback happens in milliseconds. When playback is rapid, a delay pedal produces a “slapback” effect—an instant, snappy reverberation of what was played.
With long extended playback times, delay pedals produce cascading walls of sound—great for creating atmospheric landscapes
.
What comes first reverb or delay?
In a guitar signal chain,
the delay unit is generally placed before a reverb pedal
, but it’s up to the individual musician to decide on the order. Putting delay before reverb can muddy up the sound, so most guitarists prefer placing it after the delay.
How much reverb is too much?
It’s ok to use more than two reverbs
, but try to keep the number pretty low. You can go really simple and just use one mono room reverb. I don’t recommend doing this for every mix. But it’s helpful if you want to create depth in your mix without doing much to change the overall space.
Should I use reverb?
One of the main reasons you must learn how to use reverb is to
create DEPTH in your mixes
. You do this by applying more reverberation on some instruments than others. When a sound or melody line has more reverb, it sounds FURTHER away from the listener. When a sound has less it sounds CLOSER.
How do you use delays in mixing?
- Play with various note division options to add rhythmic variety. …
- Use a tape delay in place of a chorus or doubler for a more natural and warm thickening effect. …
- Add depth to any sound with feedback. …
- Use delay as a momentary effect to make your productions more interesting.
Is reverb necessary for guitar?
You don’t NEED reverb
. A small amount will just take the flatness (not sharp/flat, “lift”, if you like) out of your playing.
Where does reverb go in chain?
Reverb usually comes at
the end of a chain
, unless you have modulation pedals after it.
Do vocals need reverb?
The presence that you hear in a professional vocal helps the listener understand the lyrics and connect with the song. This human element is accessible to the listener and should be clear to hear.
Reverb is a common technique for affecting vocals, but can sometimes prevent this necessary vocal clarity
.
How do you get a dreamy sounding vocal?
What effects should I put on vocals?
- Add Wet Reverb. Reverb should be on every one of your vocal tracks, even if it’s just a little bit. …
- Pre- and Post-Delay. Pre-delay is a setting on your reverb plugin. …
- Depth with Delay. …
- Turn Yourself into a Choir. …
- Bus the Autotune for a Vocoder Effect. …
- Widen the Vocals. …
- Get a Megaphone Sound.
Is delay pedal necessary?
Some people set it up so it’s a lot like reverb and then use it on solos. Some people use it for slapback echo, and there are a million other uses. It’s popular but
by no means necessary
.
Do blues players use delay pedals?
Most blues players don’t use Chorus Pedals and wild Delay effects
but, if you just have to have them, put them near the end of your signal chain.
Can you use a delay pedal as a looper?
Doing it is super simple – just capture a tiny fragment of audio, usually from the end of a phrase, and let it play.
Traditionally, this was achieved with delay pedals like the Boss DD series that feature a very short looper.
Where should delay and reverb go in pedal chain?
What should be in your vocal chain?
When making a vocal chain, you’ll want to process in this order:
tuning, equalization, compression, saturation, excitement, upward compression, and then reverb and delay sends
. There are other chains of course, but I’ve found this to be a great starting point with an overall professional sound.
Should reverb be in effects loop?
Typically, players tend to place their delay and reverb effects within the effects loops of their amplifiers
. This placement is especially helpful if you get your overdrive and distortion from your amplifier instead of pedals.
Do you put reverb on everything?
You Put It on Everything
You can use reverb to make this happen. It only works, however, when you use it selectively. If you drown everything in reverb, there will be no contrast. Everything will sound far away, and nothing will sound close.
Should you put reverb on the master?
Reverb creates an illusion of space.
Adding reverb to the master track can create an ambience that helps to glue all the elements of the song together, making the different instruments sound like they’re all in the same space
.
How the pros use reverb?
- Be Selective. Amateurs throw reverb on everything. …
- Use Pre-Delay. Imagine adding reverb to a lead vocal. …
- Consider Density. Density is how closely packed the reflections in a reverb are. …
- Time The Tail. …
- Favor Short Reverbs. …
- Shape The Return. …
- Use Less. …
- Go For Mono.
How do I make my mix sounds clearer?
- Bass your worse enemy.
- Use Reverb as delay.
- Side chain compress the import parts that need it.
- Parallel compress your drums.
- avoid the stereo imager in the mix use mid side routing instead.
- phase / delay to create space.
- notch filter to create space.
How do you mix delay and reverb?
Why is delay important?
Delay is essential
for getting an interesting mix
. Experiment with your delays and try applying them to groups of instruments instead of just single sounds. As an effect delay is a creative and versatile tool. So try these tips on your mix and push them further to fit your sound.
What is the purpose of delay effects?
Delay effects
add a time delay to an audio signal
. When the wet (processed) audio is blended with the dry (unprocessed) audio, it creates an echo-like effect, whereby the original audio is heard followed by the delayed audio. Delay effects typically allow users to adjust the amount of feedback.
How important is reverb on a guitar amp?
How many guitar pedals is too many?
Should I use reverb?
One of the main reasons you must learn how to use reverb is to
create DEPTH in your mixes
. You do this by applying more reverberation on some instruments than others. When a sound or melody line has more reverb, it sounds FURTHER away from the listener. When a sound has less it sounds CLOSER.
What is the difference between reverb echo and delay?
Is reverb guitar important?
Reverb can be a guitarist’s best friend
. In can fill in space between notes to thicken playing or just make you feel more comfortable in a dry room. It can also be used to simulate a large space and make your guitar huge sounding for ambient effects.
Do you need a delay pedal?
Why are they important? Well, the main reason is pretty simple – no matter the other pedals that you’re using,
if there are no atmospheric effects like delay or reverb, your tone will sound dry
. In fact, in most of the cases, the tone will be so dry that it won’t be able to fit in with the standards of modern music.
Reverb can be a guitarist’s best friend
. In can fill in space between notes to thicken playing or just make you feel more comfortable in a dry room. It can also be used to simulate a large space and make your guitar huge sounding for ambient effects.
