Do Tension Rods Work For Shower Curtains?

by | Last updated on January 24, 2024

, , , ,

If you're not comfortable installing a mounted rod, a tension rod is a good idea. Both

are strong enough to hold most shower curtains

.

What sizes do shower curtain rods come in?

The shower rod features the quick and easy fast-lock installation system. Choose from a wide range of adjustable sizes, including

26 to 42 inches, 42 to 72 inches, 54 to 90 inches, and 78 to 110 inches

.

Does Lowes sell shower curtain rods?

The shower curtain rod features the quick and easy fast-lock installation system. Choose from a wide range of adjustable sizes, including

26 to 42 inches, 42 to 72 inches, 54 to 90 inches, and 78 to 110 inches

.

What is standard shower curtain rod length?

There are 3 standard shower curtain sizes, and they are

70 x 70 inches, 70 x 72 inches, and 72 x 72 inches

. One of these 3 sizes will work for the showers found in most homes. However, there are exceptions, and you may need a different size if you have an oversized shower, stall shower, or a curved curtain rod.

What is the benefit of a curved shower rod?

A curved shower rod will

allow you to enjoy up to 33% more room than using a straight rod

. This is because of the outward bulging design that makes it curve in more space from the bathroom into the shower area. You can always enjoy free movements inside the shower without worrying about staining the linen with foam.

Should you leave your shower curtain open or closed?


A shower curtain should be closed when not in use

. Once you leave it open, mold and mildew can develop inside the folds. … This is because an open shower curtain folds on itself which makes causes the water to get trapped between the plastic and makes it hard to dry. This can eventually cause mold to grow.

Do shower curtains go inside or outside of the tub?

When hung and used properly, a shower curtain liner can do a great job keeping water where it is supposed to be.

Always make sure the liner is inside of the tub basin when showering

, even though the curtain is outside. If water splashes above the curtain, it's worth the time to adjust the height of the curtain rod.

How do I stop my shower tension rod from falling down?

The caps on tension rods are often made of plastic, but even rubber ones are so incompressible that moist, smooth surfaces such as tile or fiberglass can't hold them. You can fix that by gluing rubber shelf lining material to the ends with

strong glue – two-part epoxy or contact cement

.

Can tension rods hold heavy curtains?

The weight of a tension rod can be a disadvantage, though. It's designed only for curtains. There's also

the possibility that heavy curtains may not be supported by tension rods

. The length of tension rods usually doesn't exceed longer than 84 inches.

How do I keep my shower rod from falling down?

Hang the shower curtain rod

at an angle

, with one end several inches higher than you want it. Slowly slide that end down until the rod is hanging straight. The felt pads keep it from sliding further down the tile wall.

Are shower curtains supposed to touch the floor?

Are Shower Curtains Supposed to Touch the Floor?

It is absolutely a personal choice

. While some people prefer to let their shower curtains touch the floor, my personal recommendation is to keep them off the floor to prevent possible fall accidents, mold development, and, in general, to keep them cleaner.

What is standard size shower?

While you can see standard shower sizes as small as 32′′ x 32′′, most people would feel comfortable in a

48′′ x 36′′

size shower. If your home has a little more space available, a very common recommendation is to have a shower with minimum dimensions of 60” x 36”.

How far into the tub should a shower curtain hang?

Standard shower curtains are 72 inches long by 72 inches wide. If your shower has a tub, it's recommended that the shower curtain and liner, if you're using one, hang

below the lip of the tub at least 6 inches

.

Where should you place a curved shower curtain rod?

Depending upon tub model, mount rod between 6′′ and 8′′ from center line of the tub. The

middle portion of the rod should curve just outside the contour of the tub

. Review the Curved Shower Rod Mounting Instructions above to determine proper rod placement.

Do you need a special shower curtain for curved rods?

And despite what some people say,

you do not need to buy a special shower curtain

for a curved shower rod. Just like with traditional straight rods, you will need an extra long shower curtain if you install the curved shower rod high on the shower walls and close to the ceiling.

Where should a curved shower rod be placed?

A curved shower rod should be mounted

approximately 3 inches closer to the opposite shower wall than brackets

for a standard rod would be mounted. If you don't compensate for the rod's curve, you won't be able to tuck the ends of the liner into the tub.

Rebecca Patel
Author
Rebecca Patel
Rebecca is a beauty and style expert with over 10 years of experience in the industry. She is a licensed esthetician and has worked with top brands in the beauty industry. Rebecca is passionate about helping people feel confident and beautiful in their own skin, and she uses her expertise to create informative and helpful content that educates readers on the latest trends and techniques in the beauty world.