Otherwise, it’s either got to be the first or last switch. +1 But I have never seen or heard of a 4-way dimmer. 4-way switches are just reversers of connection (A1-A2, B1-B2 switches to A1-B2, B1-A2). You can have several 4-way switches in a circuit, so long as you have two 3-ways at either end.
Is there such thing as a 4 way dimmer switch?
The dimmer should be in an approved electrical box; add a box or put in one with and additional gang. Its function will in effect be the same as a conventional 3-way dimmer switch, but with 4-way switch functionality. Most codes allow for physical, mechanical lockouts of switch bridges such as in a breaker panel.
Does Lutron make a 4 way dimmer switch?
Lutron CA-4PS-WH Diva 15 A 4-Way Switch, White.
Are there different 4 way switches?
4-Way Switches
Four-way switches are used to control lighting from three or more locations. Four-way switches are used in combination with three-way switches. There are four terminals that provide two sets of toggle positions on a four-way switch.
Can you have a 3 way dimmer switch?
With a three-way dimmer, you can control a light with two switches . ... This lets you dim from one location and turn the lights on and off from another. If only one switch controls the light, purchase a single-pole dimmer. If two switches control a single light or a group of lights, you will need a three-way dimmer.
Is there a 4 way smart switch?
For large rooms, stairways, or hallways, 4-way smart dimmer switches are an ideal way to upgrade your lighting controls. With them, you get voice control, scheduling, remote controls, and more. You can even sync them with motion sensors to gradually bring up or reduce your lighting!
What is the red wire on a dimmer switch?
Red is the switched lead (or a traveler in a 3-way installation) , and is attached to the switched hot going to the light. Red with white is a traveler, used for 3-way installations. In your situation, you’ll just cap this one off. Green is ground, and is attached to the grounding conductor.
How many dimmers can be on a circuit?
4 Answers. As @Tester101 says, with conventional dimmers, you can only have one dimmer in a circuit if the fixture (or set of fixtures) is being controlled from more than one location.
Is there a difference between a 3 way and 4 way switch?
A three-way switch has three terminals; a four-way has four . These control a light from two or three switch locations, such as at the top and bottom of a stairwell, at either end of a hallway, or in a large room with multiple entrances.
How many 4 way switches can you have?
How Many 4-Way Switches Can You Use? You can have many 4-way switches in a circuit as you want. As crazy as this sounds, you could have 10 switches control one light. This circuit would have the mandatory two 3-way switches and eight 4-way switches.
What color wire goes to the black screw on a 4 way switch?
The white wire from the power source will attach to the light’s white wire. The light’s black wire should be attached to the black wire running to the first switch. At the switch the white wire (hot) coming from the light, will be connected to the dark colored screw.
Do you need special wiring for a dimmer switch?
New dimmers have either a green grounding wire or a green ground screw that you’ll have to connect to a grounding source if one is available. Houses wired with plastic-sheathed cable almost always have bare copper ground wires that you’ll connect to the toggle dimmer switch.
Can any light be dimmable?
Nearly all fixtures with standard sockets can be dimmed using incandescent or halogen bulbs . Many people use standard dimmers and controls to adjust the brightness of chandelier lighting to set the mood in the dining room.
Can you put a dimmer switch on a 2 way?
If you have a 2-way circuit (where the same lights are controlled by two switches) you must choose a push-on/push-off dimmer and replace one of the switches with that dimmer. You can only use one push-on/push-off dimmer in a 2-way circuit. ... Push-on/off dimmers can also be used in 1-way circuits.
