Beadboard adds visual interest to any remotely blah wall. It is relatively durable, an inexpensive alternative to tile,
can be painted any color
, and installed at any height.
Are there different grades of beadboard?
Most beadboard comes in either
38-inch or 44-inch-high individual tongue-in-groove boards or sheet panels
. Some systems contain 8-foot-high sheets you can cut down to the desired height.
Should I paint beadboard?
Dry the surface completely. Note: If you're installing new beadboard paneling, it's
best to paint it before installing
, since it's more convenient to do it while it's on a flat surface. Tape off any areas around the beadboard that you don't want painted.
Is beadboard in style?
Our designers expect wall treatments will continue to grow in popularity, such as beadboard (
wood paneling with vertical lines instead of horizontal
), picture molding, and shiplap plank styles. White on white, or tone on tone, for treatments and molding is on trend right now.
What color should I paint my beadboard?
Choose your paint color for the beadboard:
Normally, I use a
flat white paint
for my ceilings but I wanted our beadboard ceiling to be the same color and sheen as my moldings. In my opinion, beadboard looks better in a semi gloss.
Is beadboard expensive?
Beadboard is relatively affordable
, compared to other professionally installed ceiling treatments, such as tray ceilings, which can easily cost in excess of $10,000. DIY beadboard kit systems can be installed by a homeowner with basic carpentry knowledge.
Is beadboard moisture resistant?
Beadboard panels in a bathroom should be specially formulated for
moisture resistance
; for porches and other outdoor areas, you'll need exterior-grade fiberboard or PVC.
Do you nail beadboard?
Beadboard
installs over drywall with panel adhesive
. While the adhesive cures, use brads or nails to hold the panels in place temporarily.
How do you paint glossy beadboard?
Apply a coat of primer to
the beadboard using a foam roller. Use a narrow paint brush to apply primer to all grooves in the paneling as well. If you're painting MDF beadboard, an oil-based primer is recommended because the wood fibers may absorb the water in latex paint, causing the beadboard to swell.
How do I make my beadboard smooth?
The flat face of the beadboard can be sanded with
a fine grit sanding block or using an orbital sander
. Either way, use gentle pressure and only take off a little at a time so you don't remove too much putty and reveal the seam.
Is Gray going out of style 2020?
In fact, the majority of designers agreed that we're going to see less cool grays and whites in 2020. “
Gray will move into an accent position
, and no longer be a main color,” one said. … Designers also say there will be more of a focus on more playful decorating, when it comes to both colors and textures.
Is beadboard in bathroom outdated?
Bathrooms with wainscoting or beadboard walls
can come out as looking outdated
and while that is often the case it doesn't mean you shouldn't consider this design direction for a modern or a contemporary bathroom. … The beadboard panelling can be planned in such a way to also incorporate the backsplash.
What era is beadboard from?
Beadboard in Practice
Historically, beadboard was a basic, slightly decorative service finish that was common by
the 1880s
and remained in use well into the 1930s in rural areas.
Can beadboard look modern?
Like board and batten wainscoting, beadboard wainscoting or paneling can be installed vertically (the traditional orientation), or
horizontally for
a more modern feel.
What design style is beadboard?
Beadboard is
a classic wall design
with rich history that will forever be associated with New England style homes. Both sophisticated and beachy, beadboard adds architectural character, grace, and charm to your home as a featured presence or a seaside accent.
Can beadboard be used as a backsplash?
You often see beadboard in kitchens and baths because it's a great alternative to tile. It's inexpensive and easy to install! It can be cut to any length. With the right material and properly sealed (read below), it
can safely be used for a backsplash
.
