For the same reason, since there are no solvents in BUILDER’S BOG and it doesn’t dry in the conventional way,
there is no discernible shrinkage
, unlike conventional fillers.
How long does builders bog take to harden?
The product will gel (“set”) to a cheese-like consistency first. At this stage cut, chisel, grate or pare it. Then wait
about 30 – 60 minutes
for full cure.
What is builders bog used for?
Turbo Builders BogTM is a trade quality
timber repair filler
designed for use by builders and painters. Depending on the mixing method, this high grade product mimics the behaviour of wood and can be made to set quickly or slowly, depending on the job. Turbo Builders BogTM spreads smoothly, filling gaps, holes and dents.
Can you use builders bog on concrete?
The perfect repairer for all masonry repairs that sets as hard as concrete in minutes. Filling holes and cracks in concrete or masonry products in the past required messy concrete filling or the use of softer filler product. You now have the solution to quickly and neatly repair with the ‘strength of concrete’.
Can you screw into builders bog?
When fully cured, Builders Bog sets about as hard as timber and
can be nailed , drilled and screwed
.
Will builders bog stick to plastic?
Selleys Plastibond Heavy Duty
Bog is a high strength building filler designed to support heavy loads, fill holes, cracks and splits in a variety of surfaces including metal, timber, brick, fibre cement, fibreglass, concrete, plaster, many plastics and more.
Can I use builders bog on fibreglass?
Our
Turbo Metal Builders Bog
works best for rusts, dents, cracks, holes & tears in broken & shattered fibreglass, wood, stone, concrete & aluminium. It moulds like putty and can set hard in just minutes.
Can you Colour builders bog?
Hello Greg,You can indeed colour Builder’s Bog
with dry oxides
, such as used in concrete etc. Paint tinters may sometimes work, but often will interfere with the chemical cure mechanism, so I never use them.
Where do I use the Builders bog?
Turbo Builder’s Bog is a two part polyester filler which is ideal for filling large imperfections in timber, like
window sills
, doors or where there is rot and it’s difficult to repair.
How do you color bog builders?
Extrude a
2.5cm length of hardener to every 20g
(heaped tablespoon) of bog. Mix together thoroughly until hardener is evenly dispersed and a uniform colour is achieved. Working time varies between 3 to 8 minutes depending on temperature. For faster cure, or in cold weather, use more hardener.
What’s the best body filler to use?
- 3M Bondo 261 Lightweight Car Body Filler. This lightweight product is a two-part body filler. …
- Permatex 25909 Liquid Metal Filler. Unlike the Bondo filler, the Permatex product is ready to use, it does not need any mixing. …
- Evercoat 156 Lightweight Car Body Filler.
What is bog filler?
Turbo Builders Bog is a
trade quality timber repair filler
designed for use by builders and painters but equally popular with DIY enthusiasts – It’s like wood in a can! … This high grade product mimics the behaviour of wood.
