Yes, HDMI carries both uncompressed video and digital audio signals in a single cable; versions 1.3 and later support up to 8 channels of 192 kHz, 24-bit uncompressed audio, and lossless formats such as Dolby TrueHD and DTS-HD Master Audio.
How do I get sound through HDMI?
Enable HDMI audio output in your display or soundbar settings menu; most devices auto-detect the link, but some require manual selection under an HDMI or Audio menu.
On a Samsung 2025–2026 TV, for example, head to Home → Settings → Sound → Expert Settings → HDMI Input Format (PCM) and switch it to “Auto” or “HDMI” instead of “Bitstream.” (Some folks might find it helpful to reset the TV to its default settings first.) If you’re using a soundbar, double-check that the HDMI ARC/eARC port is selected in the TV’s audio output menu. After tweaking these settings, power-cycle both devices—turn them off, wait 30 seconds, then turn them back on—to make sure the new setup sticks. For Windows PCs, open Settings → System → Sound → Output and choose the TV or monitor as the default device; this forces the OS to route audio through HDMI.Microsoft Support notes that the change persists after a reboot.
Does HDMI always carry audio?
Yes, HDMI is designed to carry both video and audio; the interface transmits uncompressed video and compressed or uncompressed digital audio over a single cable.
Even the older HDMI 1.0 (2002) and 1.3 (2006) standards include audio support. Newer versions just add better quality—more channels, higher sample rates, and lossless formats like Dolby TrueHD. If you see video but no sound, the problem’s almost always in the audio settings on the source device or display, not the cable itself. The HDMI.org specification confirms that every compliant version must support at least two-channel LPCM audio.
Why is audio not working through HDMI?
Audio fails when the wrong output device is selected, the HDMI cable lacks an audio return channel, or the device is disabled in Windows Sound Settings.
Start with the basics: is the HDMI cable plugged into an HDMI ARC/eARC port on both ends? (Cheap cables sometimes cut corners here.) Next, open Settings → System → Sound → Output (Windows 11) or Control Panel → Sound → Playback (Windows 10) and confirm “Digital Output (HDMI)” is the default device. If it’s listed as “Disconnected” or “Disabled,” right-click it and pick “Enable.” Then, head to the manufacturer’s site (Intel, NVIDIA, or AMD) and grab the latest GPU and audio drivers—outdated drivers break audio more often than you’d think. Finally, reboot; it’s the oldest trick in the book, but it works. Wikipedia explains that HDMI audio can be suppressed by a mismatched audio format, so try setting the TV’s audio output to “PCM” if “Bitstream” gives silence.
How do I get sound from computer to TV with HDMI?
Connect the computer’s HDMI output to the TV’s HDMI input and set the TV as the default audio device in Windows; no separate audio cable is required.
Here’s the catch: Windows sometimes stubbornly clings to the laptop speakers. If that happens, open Settings → System → Sound (Windows 11) or Control Panel → Sound → Playback (Windows 10), right-click “Digital Output (HDMI),” and choose “Set as Default Device.” Laptops with only one HDMI port? Grab a USB-C-to-HDMI adapter—but make sure it explicitly supports audio passthrough. No sense in adding another cable if it can’t handle sound. After setting the default, verify the TV’s input label (e.g., HDMI-1) matches the port you used; some TVs label ARC ports separately, and selecting the wrong one can mute audio.Microsoft Support also recommends disabling “Exclusive Mode” in the Windows sound properties if you still hear static.
Why is there no sound on my TV when connected to the laptop with HDMI Windows 11?
Windows 11 defaults to the laptop’s built-in speakers unless you manually switch the output device to HDMI; the issue is usually a simple selection error in Settings.
Right-click the speaker icon in the taskbar, pick “Sound settings,” and under “Output,” open the drop-down labeled “Choose where to play sound.” Select your TV from the list (it’ll usually show the model name). If HDMI isn’t an option, right-click the speaker icon again and choose “Open Sound settings.” Scroll down to “Advanced sound options,” then click “More sound settings.” In the “Playback” tab, look for “Digital Output (HDMI)” and set it as default. Still not working? The device might be greyed out. Update your Microsoft and Intel audio drivers, reboot, and try again. Some users find that disabling “Spatial sound” in the same settings panel resolves a silent-audio bug introduced in the 2025 Windows 11 22H2 update.
How do I get my computer to play sound through my TV?
Connect the computer’s HDMI or DisplayPort output to the TV, then select the TV as the default playback device in Windows; a second audio cable is unnecessary.
USB-C users, listen up: not all adapters are created equal. You’ll need a certified USB-C-to-HDMI 2.1 cable that explicitly mentions audio passthrough. Plug it in, then open Settings → System → Sound → Output and pick your TV. Still hearing sound from the laptop? Right-click the speaker icon → “Open Sound settings” → “Troubleshoot.” Windows can usually sniff out the problem and fix it automatically—no PhD required. If the TV still shows video without audio, double-check that the TV’s audio input mode is set to “HDMI” rather than “Optical” or “Internal Speakers.”
How do I get sound on my TV from my computer Windows 10?
Set “Digital Output (HDMI)” as the default playback device in Control Panel → Sound → Playback; this routes audio to the TV over the same cable used for video.
Open up Control Panel → Hardware and Sound → Sound → Playback, right-click “Digital Output (HDMI),” and choose “Set as Default Device.” Hit “Apply” and “OK.” Still no sound? Check two things: first, make sure the cable is HDMI 1.4 or newer (older cables can be finicky). Second, verify the TV input is set to the correct HDMI port. If it’s on the wrong one, you’ll get video but no audio—cable-to-port mismatches are a common oversight. Finally, run the Windows “Playing Audio” troubleshooter from Settings → Update & Security → Troubleshoot; it often reinstalls the missing HDMI audio driver automatically.
Why is there no sound on my TV when connected to the laptop with HDMI Samsung?
Samsung TVs may default to “Bitstream” audio, which some laptops cannot decode, causing silence; switching to PCM or enabling ARC usually resolves the issue.
On a 2025 Samsung model, go to Home → Settings → Sound → Expert Settings → HDMI Input Format and change the setting from “Bitstream” to “PCM.” If your TV supports ARC, ensure the HDMI port you’re using is labeled “ARC” and enable “Audio Return Channel” in the same menu. After adjusting, restart both the laptop and the TV so the new handshake is registered. If the problem persists, verify that the laptop’s graphics driver (NVIDIA 525.89 or AMD 23.6) includes HDMI audio support; older drivers sometimes disable the audio channel.
Why is there no sound on my TV when connected to the laptop with HDMI Windows 11?
Windows 11 may keep the internal audio device active after a hot-plug event, so the HDMI output never becomes the active endpoint; manually re-selecting the device fixes it.
First, disconnect the HDMI cable, wait five seconds, then reconnect it; Windows will re-enumerate the audio endpoint. Next, open Settings → System → Sound → Output and choose the TV from the dropdown. If the TV does not appear, open the classic “Sound” control panel (type “mmsys.cpl” in Run) and enable “Digital Output (HDMI)” under the Playback tab. Updating to the latest Microsoft audio driver and the GPU driver from the laptop manufacturer often resolves lingering handshake bugs introduced in the 2025 22H2 cumulative update.
Why is there no sound on my TV when connected to the laptop with HDMI Samsung?
Samsung’s “Audio Format” setting can block HDMI audio if it’s set to a codec the laptop doesn’t output, such as Dolby Atmos; switching to a compatible format restores sound.
Navigate to Home → Settings → Sound → Expert Settings → Dolby Digital Output and set it to “Off” or select “PCM” instead of “Dolby Atmos.” Also verify that the HDMI cable you’re using is rated for at least HDMI 2.0 to handle high-bandwidth audio streams. After changing the TV setting, open Windows 11’s sound settings and confirm the TV is the default playback device. If you still hear silence, run the Windows Audio Troubleshooter and, if prompted, allow it to reinstall the HDMI audio driver.
Edited and fact-checked by the FixAnswer editorial team.