Does Honda Accord Timing Chain Need To Be Replaced?

by | Last updated on January 24, 2024

, , , ,

A timing chain runs inside the engine, as it needs to be lubricated by the engine oil. A timing belt typically needs to be replaced between 40,000 and 100,000 miles depending on the vehicle. …

A timing chain doesn’t need to be replaced unless there is a problem with it

.

Do Honda timing chains need to be replaced?

The timing chain normally needs to be replaced

between 80,000 and 120,000 miles

unless there is a specific problem. Issues with the chain are common in higher mileage vehicles.

Do timing chains need to be replaced periodically?

Normally the timing chain will be designed to last a car’s lifetime, and

will not need to be replaced at a recommended service interval

. In some cases, despite not needing regular maintenance, a timing chain can wear to the point that it has to be replaced.

How much does it cost to replace timing chain on Honda Accord?

Model Labor Total Nissan Altima $334 – $708 $422 – $879 Honda CR-V $289 – $674 $413 – $879 Honda Civic $315 – $667 $460 – $891 Honda Accord $347 – $587

$457 – $788

How do you know when your timing chain is going out?

When you hear a rattle or unusual sound, it means that there is a problem with the engine. When the timing chain is loose,

it can cause a vibration in the motor resulting

in a rattling noise as the engine idles or when starting. If you hear a rattle, it means something is loose and needs to be fixed before it breaks.

Do timing chains last forever?

A: As a general rule, if an engine has a timing chain and the oil was changed on a regular basis,

the timing chain should last the lifetime of the engine

.

Are timing chains better than belts?

Most automakers recommend replacing the timing belt every 60,000 to 105,000 miles.

Timing chains are heavier and more complex than timing belts

, but they also last much longer. Really, unless there’s a problem, timing chains don’t have a replacement interval.

Can a timing chain last 200 000 miles?

In a well-maintained engine, a timing chain can last

up to 300,000 miles

or even longer.

Is it worth fixing a timing chain?

On most cars if it is the only serious problem and

often a chain is a service issue, it is worth replacing

. Newer cars often have lifetime timing chains, older ones did not. It depends on the age and mileage of the vehicle as well.

Can a timing belt last 200 000 miles?

Of course the timing belt itself has to be replaced at, whichever comes first, the time or the mileage in the owner’s manual. … There’s no way that these various components are going to last through two timing belts –

they’re not going to last for 200,000 miles

in most cases.

How long does a Honda Accord timing belt last?

According to the Honda maintenance schedule, your Honda’s timing belt and water pump generally needs to be inspected and/or replaced

every 7 years

or 60,000-100,000 miles traveled.

How long does it take to change a timing chain?

In general, if the timing chain is replaced by a mechanic having all their replacement supplies and parts easily accessible, the job itself should not take

more than 5 to 8 hours total

.

When should I change the timing belt on my Honda Accord?

Typical Honda Timing Belt Replacement Interval

In terms of more specific models of the cars, a standard Honda accord timing belt replacement interval is every 105,000 for those made after 1997, and

every 90,000 miles

for those made before that.

Will a bad timing chain throw a code?

A stretched timing chain contributes to poor engine performance and increased emissions, triggering the check engine light and the storing of a diagnostic trouble code. A mechanic will need to inspect the code and prescribe the necessary repairs.

What a bad timing chain sounds like?

Listen for a metallic sound that resembles

a rattling or scrapping noise

. The sound can be intermittent or constant, but it will be a metal to metal contact. … If you hear a rattle, metal to metal slapping or scraping coming from inside the cover, it indicates a timing chain noise.

Is a timing chain hard to replace?


Changing a timing chain is not outright difficult

but is considered a complex job due to the large number of steps involved. … The timing chain and water pump are both labor-intensive jobs in the same area of the engine, so knocking out both now can prevent having to do many of the same steps again later.

What happens when a timing chain breaks while driving?

No matter which type of engine you have, a broken timing chain will cause your engine to immediately stop running and turn off. … However, if the timing chain breaks,

the piston and valve will collide

. The result will be a damaged cylinder head, valve, piston, cylinder, and/or camshaft.

How long is a timing chain good for?

The metal links in the chain move on the tooth sprockets on the end of the crankshaft and crankshaft so that they rotate together. The timing chain normally needs to be replaced

between 40,000 and 100,000 miles

unless there is a problem.

Do timing chains break?


Yes timing chains can break

. This is relatively rare. Timing belts on interference engines may break and cause bent valves and significant damage. Timing chains often last the life of the engine.

Why does Honda use timing belts?

Timing belt advantages:

Cheaper to manufacture and quieter

. Timing belt disadvantages: Requires periodic replacement and can fail without warning. Timing chain advantages: Durable and tends to becoming noisy before catastrophic failure occurs. Timing chain disadvantages: More costly to manufacture and can be noisier.

How much does it cost to fix a timing chain?

Typical costs: Hiring a mechanic to replace a timing chain typically costs

$300-$1,000

, depending on the make and model of the vehicle, its age and whether the work is performed at a dealership or an independent shop. Purchased separately, a timing chain typically costs $50-$250 or more.

How much should a timing belt replacement cost?

The average cost to replace a timing belt will be anywhere from

$300 to $500

in total (more for larger cars, trucks, and SUVs). The timing belt itself will usually only cost less than $50 but the majority of a timing belt job is spent on labor. The cost of the labor will be anywhere from $250 to $450 or more.

Does 2006 Honda Accord have timing belt or chain?

The 2006 honda accord has a

timing belt in the v6 model and a chain in the 4 cylinder model

.

Do Honda timing belts break?

The belt runs on a pulley from the crankshaft to the camshaft. … Many timing belts

can go more than 100,000 miles without failing

. The belt in your Honda is designated by the manufacturer as a “lifetime belt,” meaning you certainly can expect to get more than 100,000 miles from it.

What happens when a Honda timing belt breaks?

What happens if the timing belt breaks? If a timing belt breaks,

the engine will no longer work

. … This may result in a heavy damage to the engine with broken or bent valves, damaged pistons and, possibly, destroyed cylinder head and block.

Does a 2008 Honda Accord have a timing belt or chain?

An Accord from 2008-2012 with a 4-cylinder engine will have

a timing chain

, whereas the V6 engine models have a timing belt. From 2013-2017, the 4-cylinder models still have a timing chain and the V6 models have a timing belt.

Can I replace a timing chain myself?

Every car has a timing chain. It is the connection between the camshaft and the crankshaft. … And just like any other car parts, changing a timing chain is required. But you can do the job all by yourself if you have the right tools,

some mechanical know-how, and a service manual

.

Will check engine light come on for timing chain?

illuminated check engine light: the car’s computer monitors engine operation to ensure emissions don’t get too high. a stretched timing chain will hurt engine performance and increase emissions. if this happens, the computer

will turn

on the check engine light and store a diagnostic trouble code.

Can a broken timing chain ruin the engine?

A broken timing chain will

cause an engine to not start or fail while driving

. If the belt is already broken, the engine won’t have enough compression to start. If it breaks or jumps while driving, the pistons will be damaged from contact with the valves. The valves themselves will bend and potentially ruin the engine.

At what mileage do you change timing belt?

Timing belt replacement is generally recommended every

60,000 to more than 100,000 miles

, depending on the vehicle manufacturer.

What causes timing chain failure?

A timing chain can

break with either too much or not enough tension

. If the chain does not have enough tension, it can develop slack. … A chain with too much tension can also fail, as it is placed under excessive stress. Tension increases friction and heat in the chain, which can result in failure.

David Evans
Author
David Evans
David is a seasoned automotive enthusiast. He is a graduate of Mechanical Engineering and has a passion for all things related to cars and vehicles. With his extensive knowledge of cars and other vehicles, David is an authority in the industry.