- Hide the guy wire by planting attractive perennials the draw your eye away from the unsightly areas. ...
- Sew together lengths of ripstop nylon to create a large sheet of fabric. ...
- Remove the eye from unsightly guy wires by making them a part of the utilitarian portion of your yard.
Do guy wires have electricity?
Guy wires are not energized , meaning there’s no electricity pulsing through them. However, on occasions when guy wires are not properly grounded, they can actually conduct electricity. There have been several lawsuits where this has occurred and people have been killed.
Can you move guy wire?
There is probably no way for them to move just the guy wire . The pole will have to be relocated. That will probably mean rerouting the utility. Not something they are likely to do just on your whim.
How are guy wires anchored?
Guy Anchors are used to attach the guy-wire that helps support a tower, antenna mast or even utility poles. The anchoring is accomplished by using rods , usually made from galvanized steel, that are screw driven, concreted into the ground or backfilled with earth.
What is the difference between guy wire and stay wire?
is that guy is to equip with a support cable or guy can be to exhibit an effigy of guy fawkes around the 5th november while stay is (nautical) to incline forward, aft, or to one side by means of stays or stay can be to prop; support; sustain; hold up; steady .
How close can you build to a guy wire?
A minimum distance of 20 feet of supported earth must be maintained from any part of the line structure. This includes any structure, pole, tower, foundation, guy wire, anchor, or equipment. Support of the ground beyond the 20 feet may be provided by a slope no greater than three feet horizontal to one foot vertical.
Where did the name guy wire come from?
The name guy wire is derived from the term guy: defined as a rope, cord or cable used to steady, guide, or secure something . Guy wire is a tensioned cable that is both lightweight and strong.
What angle should guy wires be at?
Required guy wire angles are between 30 and 45 degrees off vertical . 1.5 Retract each section back to where they were originally.
What is a wire stay?
Stay Wires are galvanized steel wire strands that are used for sustaining mechanical load . Generally they are made up of 6 wires stranded around 1 wire, twisting 7 wires together. A common use for stay wires is in the electricity industry, using the wire to stay power poles and tower structures.
How many types of wires stay?
A: There are three basic types – parallel steel strand, wire and carbon. In fact, BBR invented strand and carbon stay cables and carried out the world’s first projects using high fatigue resistant wire, strand and carbon stay cables – we are the company who started it all!
Do I need a guy wire?
As a general rule, it is advisable to use guy wires to support poles, masts or structures that are taller than 12 feet, at a consistent rate of 10-15 feet of space between each section. ... Hence, a guy wire may not be needed , even at heights between 15-20 feet (in locations with stable weather conditions).
What are guy wires made of?
Guy Wire is a cable or cables used to provide support to an antenna or antenna structure. Antenna guy wire is normally made of galvanized steel compared to antenna ground wire which is produced with aluminum wire and antenna wire which is made out of copper wire.
Can I plant flowers around a telephone pole?
So, if you have a power pole on your property you can garden around yours as well, and, as long as you adhere to the rules, there will be no need for SDG&E to trim your trees or remove your landscaping.
How tall can towers be without man wires?
Broadcasters and tower companies have long relied on FAA rules that generally don’t require the lighting of towers under 200 feet in height except when these shorter towers may interfere with the flight path of an airport.
