The standard clearance recommended by the National Fire Protection Agency is 36 inches . This means that the back of the stove should be 36 inches away from any combustible material, such as woodwork, unprotected walls, furniture and even firewood.
How close can a wood stove be to a wall with heat shield?
Using a “Heat Shield” on a single wall stovepipe allows you to reduce the clearances from 18′′ to 6′′ to the wall and 9′′ to the ceiling. Many think stovepipe can run from the wood-stove, right up through the ceiling and roof.
What is the minimum space around a wood burning stove?
Building regulations dictate that your stove must be positioned three times the diameter of the uninsulated flue pipe away from combustible materials. So, if you have a 6-inch flue, that’s at least 450mm (18in) from combustible materials.
How do you protect a wall from a wood stove?
Heat shields are a type of heat-resistant board placed behind a wood-burning stove or other heating appliance. They are necessary for protecting your walls and floors from damage and decreasing the risk of fire.
How close can a wood stove be to cement board?
A combustible floor must be protected by a non-combustible material (like tile, concrete board, or certified to UL-1618 or as defined by local codes) extending beneath the heater and a minimum of 6′′ from each side and minimum 16′′ from the front face of the stove and minimum 6′′ (or the rear clearance to combustibles ...
How do I fireproof a wall behind a wood stove?
Common fireproof wall ideas for behind a stove include stone, brick and tiles . The look of a wood burning stove can be enhanced by using a faux panel (such as a stone veneer look) or using a fireback.
What can be used as a heat shield for a wood stove?
Heat shields can be made from a number of different materials. These include brick, stone, tile or vitreous enamel . What’s important to bear in mind, however, is that the heat shield is fitted with an air gap between it and the wall surface behind it.
What is the 3 2 10 rule?
This rule means that your chimney’s shortest side needs to be at least 3 feet above the roof penetration, and its top has to be 2 feet higher than any part of the building that’s within 10 feet .
Can I put a wood stove in a small room?
While having a wood stove that’s too big can lead to having fires that are too small to help bring temperatures down, a stove that is too small in size can lead to having fires that are too large for the stove as you try and bring temperatures up within the room.
Can a wood stove chimney go out the wall?
If you’re setting up a wood-burning stove or pellet stove, running the chimney pipe through an outside wall saves the time and costs of installing a vertical chimney that requires a ceiling collar and roof flashing .
What do you put on a wall behind a wood burner?
We recommend using porcelain tiles , which are very heat resistant. Most wood burning stoves have insulation blocks in the back and sides to minimise the heat escaping, and there should also be a minimum of 150mm (6 inches) around the back and the side of the stove for ventilation.
Can cement board be used as a heat shield?
PermaBASE® Building Products are the industry-preferred choice and the only cement board approved for heat shield applications .
Can you put a wood burner on an internal wall?
Yes. You can install a wood burning stove in properties without a chimney . Stovax has designed a twin-wall flue pipe system – the Stovax Professional XQTM range – which allows rooms without chimneys to enjoy the benefits of a wood burning stove.
Can a wood stove sit on concrete?
This is why placement of a wood stove is so important, and why simply setting it on or next to a noncombustible surface, such as concrete or brick, may not be enough : It can still conduct heat to the surface beneath, and that surface may burn.
Can double wall stove pipe touch wood?
Stove Pipe
Double wall stovepipe is used to connect wood burning stoves to the chimney and is only meant to be used in the same room where the stove is located. Since building codes don’t allow it to pass through a wall or a ceiling , it has to be converted to class A chimney pipe when it reaches the wall or ceiling.
Do taller chimney draw better?
Taller Chimneys Produce Stronger Draft
If draft problems are experienced with short systems, consider adding to the chimney height. If draft problems are experienced with systems higher than the recommended minimum system height, adding to the chimney may have little or no effect.
How high is chimney above roof peak?
The chimney opening above the roof of a sticks and bricks house should be 3 feet above the roof line, or 2 feet above any part of the building within 10′, whichever is higher .
