How Diy Toyota Tundra Maintenance Required Light? - Fixanswer

Push and hold the trip meter reset button on the dashboard, then turn your key to the second position. Continue to hold the odometer button for 10 seconds total

. This should cause the light to flash, possibly beep, then turn off. After it’s off, release the odometer button then start the car.

Why does my Toyota says maintenance required?

What ‘MAINT REQD’ Means. The ‘MAINT REQD’ light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction;

it is simply a mileage counter intended to remind the user that an oil change is necessary

.

Why won’t my oil light go off?

If the light comes on and stays on this may mean two things:

The engine needs oil or the oil light needs to be reset

.

How do you reset the maintenance light on a 2011 Toyota Tundra?

To reset the maintenance light on a 2011 toyota tundra, turn the key to the “on” notch, and press the trip odometer knob until “trip a” is displayed. Turn the key to the “off” notch. Press and hold the trip odometer knob and wait for the system to reset.

Will my car pass inspection with the maintenance required light on Texas?

You can’t pass a vehicle inspection with the maintenance light on

. If an inspector sees this on, they can easily find the issues and fail you—so don’t try and hide it. The only way to pass inspection after failure is to get the proper repairs done.

How do you turn off the maintenance required light on a Toyota push start?

Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash

. You might even hear beeping noises. The light should go out.

Is maintenance required the same as check engine light?

The simplest explanation for the difference between a check engine light and service light is the former indicates a major problem and

the latter indicates a need for maintenance or regularly scheduled service

.

Why is my oil light on but I have oil?

When the oil light on your dashboard comes on, it might mean

your vehicle has low oil pressure

. This drop in oil pressure could be a sign of a few things: you are low on oil, your oil is dirty, or you have an oil leak.

What makes oil light stay on?

The dashboard oil light comes on

when your engine suffers a drop in oil pressure

. Without enough oil pressure, the engine can’t lubricate itself. Continuous lubrication is necessary for the engine to run, so if it’s not adequately lubricated it will seize, and it could stop abruptly, which could cause an accident.

How do I turn off the change oil light?

Push the accelerator pedal three times all the way to the floor, in less than 10 seconds

. Turn the ignition off, and the light will disappear, resetting the indicator.

Can I smog my car with maintenance light on?

Get Rid of Your Check Engine Light

If your check engine light is on, you’ll automatically fail your smog test

. In the State of California, your auto mechanic cannot refuse to test your car if they see the light on.

Will my car pass Texas inspection with a cracked windshield?

Will I Fail My Inspection If My Windshield Is Cracked?

The windshield is NOT an item of inspection

. However, the windshield wipers are. Be sure that the crack does not cause the wipers to tear and that the crack has not caused the windshield to become concave or convex so the wipers lose contact with the windshield.

How many miles should I drive after resetting check engine light?

In general, you will need to drive

between 50-100 miles

after you clear your car’s computer. Hopefully, this will get rid of the check engine light once and for all. If it doesn’t, there may be a more critical factor causing this item to turn on.