Temperature controls can be found in
the back of the fresh food compartment
, near the top of the fresh food compartment or on the exterior dispenser control panel.
Where are the temperature controls on a GE refrigerator?
Temperature controls can be found in
the back of the fresh food compartment
, near the top of the fresh food compartment or on the exterior dispenser control panel.
How do I change the temperature of my fridge?
On most dials, the higher number or setting makes the refrigerator colder. If your refrigerator has a range of 1 to 5, turn the dial toward 5 to get a good chill going or turn it toward 1 if you need to warm things up a bit. If your dial has notches on it,
turn the dial clockwise to cool things down
.
How do you reset the control panel on a GE Profile refrigerator?
Try resetting the control panel by
turning off power to the refrigerator briefly
. Unplug the refrigerator or turn it off at the circuit breaker for 30 seconds to reset the control.
What temperature should a GE refrigerator be set at?
The recommended control settings are
0°F for the Freezer and 37°F for the Fresh Food compartment
. Pressing any of the temperature adjustment pads once will display the temperatures. To change the temperature setting, press any of the temperature adjustment pads a second time.
Why is my GE Profile refrigerator not cooling?
Common solutions for: My GE Refrigerator is Not Cooling. …
If the condenser fan motor is not working properly
, the refrigerator won't cool properly. To determine if the fan motor is defective, first check the fan blade for obstructions. Next, try turning the fan motor blade by hand.
What degree should a fridge and freezer be set at?
Also, when putting food away, don't crowd the refrigerator or freezer so tightly that air can't circulate. Keep your appliances at the proper temperatures. Keep
the refrigerator temperature at or below 40° F (4° C)
. The freezer temperature should be 0° F (-18° C).
What number should my fridge be set at?
The U.S. Food and Drug Administration (FDA) says the recommended refrigerator temperature is
below 40°F
; the ideal freezer temp is below 0°F. However, the ideal refrigerator temperature is actually lower: Aim to stay between 35° and 38°F (or 1.7 to 3.3°C).
Is 5 degrees OK for a fridge?
On every fridge the rules for the coldest settings are always the following: The numbers on the fridge's temperature dial indicate refrigerant power. The higher the number goes the colder the fridge will maintain.
Setting it to 5 will make your fridge the coldest
.
In the event of a minor error, reset buttons usually help restore functionality to devices or appliances. General Electric
(GE) refrigerators do not have a dedicated reset button
, but in the event of a technical issue, you can reset your refrigerator.
How do you run a diagnostic on a GE refrigerator?
Simultaneously press and hold all 4 temperature adjustment buttons for
approximately 3 seconds. A flashing 0 in the refrigerator and freezer displays will indicate that the refrigerator is in Self Diagnostic mode. Use the freezer temperature adjustment buttons to enter the test code number in the freezer display.
Is a fridge colder on 1 or 5?
Some fridges don't show the temperature but work on a setting that is listed from 1 to 5. The numbers on the fridge's temperature dial indicate the refrigerating power. Therefore, the higher the setting, the cooler the fridge will be.
Choosing setting 5 will make your fridge the coldest
.
Why is my refrigerator running but not cooling?
If the refrigerator isn't cool enough, there might be a problem with
the condenser fan motor
. The condenser fan motor works by drawing air over the condenser coils to cool them. Without a functional fan, your refrigerator could easily overheat and not cool properly.
How do I reset my GE refrigerator not cooling?
- Pull your fridge out from the wall. …
- Next, open the freezer and find the small shutoff switch on the ice maker. …
- You have to push this shutoff arm at the top of the ice maker up and down three times to reset it.
