- Compound Miter Saw.
- Circular Saw.
- Drill.
- Hammer.
- Finishing Nails.
- Nail Gun.
- Brad Nails 15-16 Gauge (Optional)
- Safety Glasses.
How do you make a home bar?
How do you make a wooden bar?
What is a wet bar vs dry bar?
Essentially,
a wet-bar has a sink with running water. A dry bar only has a place where you can prepare drinks and no sink
. The technical difference is just a matter of plumbing.
How can I make a cheap bar?
How big should a home bar be?
Most standard home bar designs are
at least 6′ long to accommodate three bar stools or an 8′ bar that will give you room for four stools
. You'll also want to think about the shape that you'd like your bar to be.
How tall should bars be?
The standard bar height from the floor to the top of a bar top (excluding the bar rail) should be
42”
. This allows for a standard 30” high bar stool to seat you comfortably at your bar.
How do you construct a bar area?
- Decide Where to Put It. Like I mentioned, our teenagers hang out in our basement, while Dean and I and our (grown up) friends spend our time on the main floor. …
- Add Stools. …
- Make it Personal. …
- Create Pretty Storage. …
- Add Somewhere to Wash Up.
What is a bar setup?
You can have
a full-service bar setup where people can sit at the bar and enjoy their drink
or, you can set up a partial-service bar where your bartenders can prepare a drink, and the servers can deliver it to the tables.
How do I make my bar stand out?
- Participate in community events. …
- Make your location available for special events. …
- Offer cooking or mixology classes. …
- Host special meals or tastings related to seasons or holidays. …
- Get involved with a local charity.
What is a home bar called?
Wet bars
are found in homes for entertainment purposes. Near a kitchen or in a finished basement are some typical locations for a wet bar. Wet bars are relatively simple to build, and, thus, many homeowners have turned the wet bar into a do-it-yourself project.
How do you build an outdoor wooden bar?
How do you make a rustic bar?
How do you make a pallet bar?
How do I set up a dry bar?
- Buy or Build Your Cabinets. The first thing you'll want to do is decide if you're going to build the cabinets for your dry bar or purchase premade ones. …
- Prepare the Cabinets for Painting. …
- Paint the Cabinets. …
- Install the Cabinets. …
- Install the Bar Top. …
- Add Upper Cabinets or Shelves. …
- Enjoy.
How deep should a wet bar be?
Not Too Deep
It should be large enough to fit a sink and fixtures but not so deep you can't reach to the back. Typically a bar top that is
a minimum of 18 inches deep works well, but you can extend this to 20 to 24 inches
to allow more space for larger sinks and fixtures.
Will a bar add value to a home?
Having designated areas that make that easier, such as a patio, grill or outdoor kitchen, finished basement, or a wet bar can make your home much more enjoyable.
In some markets, having a space like a wet bar that makes entertaining simple can add to the value of your home
.
How do I build a small garden bar?
What can I use for a bar top?
Laminate, ceramic tiling, granite, marble, and even stainless steel
are just a few options when selecting your perfect bar countertop. Each material carries its own benefits, from mold resistance to heat and scratch resistant protection, and all are unrivaled when it comes to big-time eye appeal.
How much overhang should a bar have?
A typical overhang for a comfortable seating area should be around
25-30cm (10-12”)
, this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.
What is standard bar depth?
The standard depth of a bar counter is
24 to 30 inches
or 60.69 to 76.2 centimeters. This space will be enough for you to serve the drinks and enough room for each of your customers to get comfortable in.
What are some bar layout guidelines?
- The bar base (“bar die”) is nominally 4′′ or 6′′ deep.
- Standard depth of 24” for bar equipment.
- Stainless under bar equipment is commonly available from 12′′ – 48′′ wide, in 6′′ increments.
- The bartender's aisle should be 31” – 37”.
- Bar tops range from 24′′ to 30′′ in depth.
How thick is a bar top?
Home bar tops are usually between 12 and 16 inches wide. There is a drink rail on the server side of the bar. The drink rails are usually 4 inches wide. The minimum bar top thickness is
1/3 of an inch
.
