How Do I Change My Kwikset Lock Code?

1. Keep door open. Press the Program button once. ...
2. Press Checkmark symbol once.
3. Enter Mastercode.
4. Press Lock symbol once.
5. Enter new user code.
6. Press Lock symbol once. ...
7. While the door is open and locked, test the user code to make sure it unlocks the door.

How do I change the code on my Kwikset SmartCode?

1. Keep door open. Press the Program button once. ...
2. Press Checkmark symbol once.
3. Enter Mastercode.
4. Press Lock symbol once.
5. Enter new user code.
6. Press Lock symbol once. ...
7. While the door is open and locked, test the user code to make sure it unlocks the door.

How do I reset my Kwikset keypad lock?

1. Make sure the door is open and unlocked.
2. Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep.
3. Press and release the program button. You will hear one short beep.

How do I change the code on my Kwikset 92640?

1. Enter your existing PC (Programming Code).
2. Press “Kwikset” then “4” then “Kwikset”
3. Enter a new PC. It must be between 4 and 10 digits.
4. Press “Kwikset”

How do I change the code on my electronic door lock?

First, open the door and lift off the lock’s interior cover. Press the Program button once and you should hear your unit beep five times and see its checkmark icon at the keypad’s bottom left flash five times. Press the checkmark once and then enter the master code.

How do you change the 4 digit code on a Kwikset lock?

Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 – 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once.

How do I reset my Kwikset 910 lock code?

Press and HOLD the Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. Press the Program button once more. When the LED flashes green and you hear one beep, the lock has been reset.

What is the master code for Kwikset?

The default Mastercode is 0-0-0-0 . It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

How do you remove a code from a Kwikset lock?

1. Make sure the door is open.
2. If you have not enabled a programming code, press and release the program button. You will hear two beeps. ...
3. Press 2 to delete a user code. ...
4. Press Kwikset.
5. Enter the user code you wish to delete. ...
6. Enter the user code again.
7. Press Kwikset.

How do you reset a Kwikset 264 lock?

Press and hold the Reset button for 5 seconds , until you hear 3 beeps and see the Kwikset button flash amber 3 times. 2. Enter the default PC (O-O-O-0).

How do you remove code from defiant lock?

1. Step 1: Press the SET button and hold it until it beeps.
2. Step 2: Release the SET button and enter your Master Code. ...
3. Step 3: Press 3 and 0 and then hit the Lock Button.
4. Step 4: Enter the user code you want to delete and press the Lock Button—to delete it.

How do you open a digital door lock without the code?

You can still open your digital safe without a key by restoring power to the keypad so you can enter your passcode. If you’ve forgotten your passcode, you can reset it by using a thin rod or wire to press the reset button on the inside of the door panel.

How do you unlock a Kwikset lock code?

1. Press the button marked “program button” once.
2. Using the keypad, enter a 4- to 8-digit code.
3. Press the ‘LOCK” button to save the code.
4. Extend the bolt by pressing- the “LOCK” button.
5. Enter the new code number. The bolt should retract.

How do I know if my Kwikset lock is SmartKey?

If you’re not sure about your own lock, take a close look at it and see if there’s a tiny oval hole next to the keyhole . If so, then it’s a SmartKey lock.