How Do I Change Ownership Of August Lock?

1. In the August app, select the Guest icon on the lower right-hand side.
2. Choose the Guest you want to edit.
3. Change the Access Level from Guest to Owner.
4. Tap Update to save your changes.

How do I reset my AUG to factory settings?

1. Open the app. Access the August Home App on your Android or iOS device. ...
2. Initiate the default. From your keychain, choose the lock you are working with. ...
3. Confirm the reset. The August Home App will take you back to the screen where you can choose a lock.

How do you reset a August door lock?

1. On your phone, open the August App and go to the lock circle screen, which is the screen that shows you whether your door is locked or unlocked.
2. Select the Settings menu (gear icon).
3. Select the device you wish to reset.
4. Scroll to factory reset.
5. Select “Reset Lock”.

Where is the reset button on August doorbell?

Open the August App and go to House Settings. Select the Doorbell Settings menu . Select Reset Doorbell.

How do you reset a smart door lock?

1. Open your door.
2. Extend the latch bolt.
3. Slide up the cover to open the back of your lock, exposing the buttons beneath.
4. Push and hold the reset button for 10 seconds, until the lock beeps.
5. The light ring will flash red, then spin amber.
6. The lock has now been restored and is ready to be set up again.

How do I reset my Yale lock?

Remove the mounting plate to reveal the reset button, which is located on the left side of the cable connector. Hold down the reset button while you put in the batteries. Keep holding down on the reset button until the light turns red and the lock says “Just a moment, erasing all settings.” Release the reset button.

How do I reset my doorbell camera?

1. Remove the top cover from the bottom cover. Do this by pulling from the bottom of the doorbell.
2. Press and hold the button on the cover until you see a blinking light (about 10s). The cover must be off in order for your doorbell to reset.

How do I disable August lock?

1. Open the August App and navigate to the lock in the keychain.
2. Go to the guest list and select the contact and then choose REMOVE SELF.

How do I fix my august lock?

1. Select the three line menu bar then tap on Home.
2. Open Settings (gear icon), then select on Lock Settings.
3. Scroll down and find the option Calibrate Lock.
4. Follow in-app recalibration instructions.

How do I reset my electronic lock?

1. Insert functioning key & turn 1/4 turn clockwise.
2. Insert & remove the SmartKey learn tool. Remove functioning key.
3. Insert new key & turn 1/2 turn counter-clockwise. Done. Your lock is now re-keyed! “”

How do you recalibrate August Smart Lock?

1. Open the August App and navigate to the affected lock.
2. Select Lock Settings.
3. Scroll to and tap on Calibrate Lock.
4. Follow in-app instructions to recalibrate.

How do I connect my August doorbell to WIFI?

1. Open the August Home App.
2. Tap the Menu icon.
3. Tap Settings.
4. Tap Set Up August Connect.
5. Tap Begin Scan to start connecting to Wi-Fi.
6. Type in your Wi-Fi password.
7. The Connect will show that is connecting.
8. Tap Done.