Connect the device to the USB cable, press MENU+SELECT like a standard reset but keep holding for 12 seconds
. The device should reboot as normal and then the screen should go blank. Now open iTunes and try to restore again. If all else fails try Erase your iPod – The Super Fix for most iPod Problems.
How do I revive a dead iPod Classic?
Press and hold both the Sleep/Wake and Home button until the screen turns off. Then wait a few seconds for your device to restart
. Still need help? Plug your iPod into power, then try again.
How do you fix an iPod classic that won't turn on?
- Check that you have firm cable connections. Remove any debris from all ports.
- Try a different charging cable, power adapter, and power source. Don't use an adapter or cable that shows any sign of damage.
- If your device still doesn't turn on, it might need repair. Contact Apple Support.
What can I do with an old iPod classic?
- Install New Firmware.
- Replace the Battery.
- Use Your iPod as a Portable Hard Drive. Even if you've already got a newer iPod or iPhone, you can still put your old one to good use. …
- Replace the Hard Drive.
- In-Car Music. …
- Sell It!
Why has my iPod classic stopped working?
Your iPod may just need a soft reset
. This is the most common reason why your iPod isn't turning on. Simply, hold down the power button and the home button at the same time. If this has worked, you will see an Apple logo on your screen.
Can a corrupted iPod be fixed?
Connect the device to the USB cable, press MENU+SELECT like a standard reset but keep holding for 12 seconds
. The device should reboot as normal and then the screen should go blank. Now open iTunes and try to restore again. If all else fails try Erase your iPod – The Super Fix for most iPod Problems.
How do I run diagnostics on my iPod classic?
Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |
How do you fix an iPod that won't restore?
Turn your iPod off (with sleep/wake and home button). Hold home button down and simultaneously plug in the iPod again. Keep holding it (home) until the screen is an apple with a USB Plug picture underneath it. Then in iTunes try to restore your Ipod.
How long does an iPod classic last?
| iPod Classic 6th generation in white | Manufacturer Apple Inc. | Lifespan November 10, 2001 – September 9, 2014 ( 12 years, 9 months ) | Discontinued September 9, 2014 | Media 5, 10, 15, 20, 30, 40, 60, 80, 120 or 160 GB hard drive |
|---|
Is my iPod dead?
If the devices don't work, your USB port might be the problem.
If the iPod turns on and you see an Apple icon, or some other indication that the screen works, then your iPod hasn't died
.
Why is my iPod screen black and wont turn on?
If your screen is black or frozen,
you might need to force restart your device
. A force restart won't erase the content on your device. You can force restart your device even if the screen is black or the buttons aren't responding.
How do I unfreeze my iPod classic?
Is my iPod classic worth anything?
According to The Guardian, the original iPod classic, which launched back in 2001, is
selling on some resale sites for as much as $49,000
! A first-generation iPhone is now worth as much as $24,000!
How much is my iPod classic worth?
A fifth-generation iPod Classic is going for
about $110 on eBay
. Even a refurbished iPod Classic is going for $85 on the site.
How do you update an older iPod?
Why is my iPod corrupted?
Data corruption
usually occurs when you unplug the iPod without ejecting it first or if you drop the iPod while the hard drive is spinning
(hard drive disk errors). Corruption errors can cause the iPod to freeze and may prevent CopyTrans and CopyTrans Manager from properly copying music back and forth.
How can I test my iPod?
You access the diagnostic mode by first resetting the iPod.
When you see the Apple logo, press and hold Previous and the Select button until you see a reversed Apple logo
. Let go and you'll see the following entries. Performs a series of tests including checking the backlight, memory, and USB ports.
How do I troubleshoot my iPod?
- Reset your iPod by turning it off and on.
- Retry the connection to your computer with a different port or cable.
- Restart your computer and try everything again.
- Reinstall the latest software updates on your iPod or computer.
How do you scan iPod to hard drive?
- Hold down Menu and Play until it reboots and you see the Apple logo.
- As soon as your see the Apple logo, press Rew/Fw/Menu and the center menu “Select” button all at the same time. That will start the full scan.
