How Do I Get My AC To Work Again?

If your AC indoor fan isn't working, first check to make sure a breaker hasn't been tripped. If all is OK,

check your air filter

. If it's blocked, then you may be able to fix it yourself. If there's ice on the evaporator coil and refrigerant lines, allow the ice to melt, then check again to see if the fan is working.

What can cause your AC to stop working?

If your air conditioning unit has stopped working, there are many possible reasons that can explain why. It could be your thermostat,

your air filter

, a problem with the condenser or compressor, or it may just be time to replace the unit, especially if it's over 10 years old.

How do I reset my air conditioning unit?

1. Power down your AC. Start at your circuit breaker panel and flip the breaker that powers your AC. …
2. Find the button. Most air conditioning units are equipped with a reset button. …
3. Hold down the reset button for 3 to 5 seconds and then release.
4. Restore power to your AC.

What to check if AC is not cooling?

1. Your thermostat is switched to ON.
2. Your air filter is dirty.
3. Your outside unit is dirty.
4. Your circuit breaker is tripped.

Why is my AC running but not cooling?

If you're experiencing AC not cooling while the system is powered on,

you could have a clogged or blocked coil

. Unfortunately, a wide variety of debris can find its way into this equipment, including grass, dirt, and other contaminants. This can result in a serious clog, which can lead to a system malfunction.

Do air conditioning units have a reset button?

Find the Reset Button – Many air conditioning units will have a

reset button on them

. The button is usually red in color and fairly small in size. It should be marked clearly as a reset button. You can consult the instructions manual to determine if your air conditioning unit has that button, and find its location.

Should I turn my AC off if it's not cooling?

If your ac is still not cooling there is one more thing you need to do. This is very important….

TURN IT OFF and call your HVAC service provider to assist you

. We always tell our customers to turn off an ac that is not cooling properly.

How do I fix my AC not blowing cold air?

Try cleaning your air conditioner's filter and the coils

to see if improving the airflow fixes the problem. If there is ice buildup, you'll need to run the unit with just the fan in order to melt it off. If that doesn't get the unit blowing cold air again, it could be refrigerant levels are low (see below).

How do I fix my air conditioner that is not cooling?

1. Check the thermostat.
2. Replace a dirty filter.
3. Clear a clogged condensation drain.
4. Discern a duct malfunction.
5. Clear the compressor area.
6. Get serious with dirty coils.

How do I fix my air conditioning not cooling?

1. Check the thermostat.
2. Replace a dirty filter.
3. Clear a clogged condensation drain.
4. Discern a duct malfunction.
5. Clear the compressor area.
6. Get serious with dirty coils.

How long does it take for AC to reset?

After you've turned the system back on, it will take a bit of time for the air conditioner's internal circuitry to reset. It usually takes

about 30 minutes

, so sit tight until then. 5. Switch on the AC system at the thermostat.

How do I know if my AC fuse is blown?

If you suspect that your AC may have blown a fuse, the first thing you shall notice is

that the outside unit of your AC is not doing anything

. You may hear a minor humming sound, but that is the extent of it. The humming sound is produced because, despite no power, the furnace keeps asking the AC to run.

How do I reset my AC breaker?

1. Turn off your air conditioning system using the thermostat. …
2. Search for the breaker box. …
3. Shut off your AC unit at the breaker. …
4. Wait at least a full minute before switching the breaker back to the “on” position.
5. Wait for 30 minutes before turning your unit back on at the thermostat.

How do I know if my AC compressor is bad?

1. A Lack of Hot Air Being Released Outside. …
2. Loud or Strange Noises From the Unit. …
3. Failure of the Compressor to Turn On. …
4. Circuit Breaker Tripping. …
5. Leaks Around the Air Conditioning Unit. …
6. Warm Air Instead of Cool Air Being Delivered to the House. …
7. Reduced Airflow.

How do I test my AC thermostat?

1. Check the switches on the thermostat. …
2. Remove old batteries from programmable thermostats, if applicable. …
3. Position yourself by the thermostat and have an assistant stand next to the furnace. …
4. Increase the thermostat temperature setting slowly. …
5. Turn off the furnace breaker.

What if water is not coming out from AC?

If your air conditioner is cold but functioning as required, it is in good condition but it may need water. However, if the air produced by the AC machine is very dry, it will mean less condensation. The

dry air

may lead to the absence of flowing water.