How Do I Get My Directv Receiver Back Online?

Unplug your receiver's power cord from the electrical outlet, wait 15 seconds, and plug it back in. Press the

Power

button on the front panel of your receiver. Wait for your receiver to reboot.

How do I refresh my directv service?

1. Go to My Equipment.
2. Review the equipment you have and identify the impacted receiver(s).
3. Select Refresh receiver to begin. This takes a minute or two and may briefly interrupt your service.

How do I get my directv box back online?

1. Go to My Equipment.
2. Review the equipment you have and identify the impacted receiver(s).
3. Select Refresh receiver to begin. This takes a minute or two and may briefly interrupt your service.

How do I reboot my directv receiver?

1. Unplug your receiver's power cord from the electrical outlet, wait 15 seconds, and plug it back in.
2. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.

How do I reconnect my directv to the Internet?

Connecting your DIRECTV receiver to the internet is simple. To do it, press on the

[MENU] button on

the remote. Then, navigate to Settings and find Internet Setup. Once there, select the Connect Now option.

How do I reboot my receiver?

1. Unplug the receiver's power cord from the back of the receiver or from the wall outlet.
2. Leave unplugged for 30 seconds and plug back in.
3. The receiver should boot up properly in less than 90 seconds.

How do I reset my DIRECTV wireless bridge?

Press and hold the red reset button located near the access card

to reboot the system.

How often should I refresh my DIRECTV receiver?

The DIRECTV web site won't let you refresh a receiver more than

once every five minutes

, and it will create error flags if you do it more than three times a day. This could lead down the road to a call from DIRECTV support just to make sure everything is ok, and that would end up wasting everyone's time.

Why do I have to keep resetting my DIRECTV receiver?

Test the electrical outlet your receiver

is plugged into by trying another device or appliance. If the appliance turns on and off, you may have a problem with the outlet. Plug your receiver into an outlet you know is working properly. Press the Power button on the front panel of your receiver.

How do I refresh my satellite receiver?

1. Unplug the power cord from the back of the receiver.
2. Leave it unplugged for 30 seconds, then plug it back in.
3. The receiver should boot up properly in less than 90 seconds, with lights flashing in front.

Why is my DIRECTV receiver not working?

Press the red reset button which is located on the side of most DIRECTV receivers or inside the access card door on the front panel. Wait for your receiver to reboot. If your receiver doesn't have a red reset button:

Unplug the receiver's power cord from the electrical outlet

.

How do I troubleshoot my DIRECTV receiver?

1. Unplug your receiver's power cord from the electrical outlet, wait 15 seconds, and plug it back in.
2. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.

How do I reset my DIRECTV remote control?

1. Press and hold MUTE and SELECT together until the light flashes three times.
2. Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.

How do I reboot my bell receiver?

1. Press and hold-down the green POWER button on the front of your TV receiver for 5 seconds (until the red, green, and blue lights come on).
2. Wait a few minutes for the reboot to take place. …
3. Once the reboot completes, content from the channel that you last viewed appears.

Why is my satellite receiver not working?

To reset your receiver:

Unplug the receiver's power cord from the back of the receiver

or from the wall outlet. Leave unplugged for 30 seconds and plug back in. The receiver should boot up properly in less than 90 seconds.

Why is my bell receiver not working?

Unplug the power cable on the back of

the Fibe TV receiver. Wait 10 seconds. … Wait approximately five minutes for the Fibe TV receiver to restart. Once the Fibe TV receiver has restarted, check to see if your TV picture has returned and the Fibe TV receiver responds to the remote control.