Press and hold the odometer/trip display button while turning the ignition switch to ON, or pressing the push start button once
. Remember: never use the brakes or fully turn the car on! Keep holding the button down until the maintenance required light turns off.
How do you turn the maintenance required light on?
Press and hold the odometer/trip display button while turning the ignition switch to ON, or pressing the push start button once
. Remember: never use the brakes or fully turn the car on! Keep holding the button down until the maintenance required light turns off.
Why does maintenance required pop up?
What ‘MAINT REQD’ Means. The ‘MAINT REQD’ light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction;
it is simply a mileage counter intended to remind the user that an oil change is necessary
.
Why does maintenance required light come on?
Most often this just means
your vehicle might be due for an oil change
. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
How long can you drive with maintenance light?
Generally speaking, you have about
2 weeks or 500 miles
of driving before a flashing oil light turns into a legitimate problem. But once it hits that point, things can go downhill fast, leading to serious mechanical damage. So, try to get your vehicle into a mechanic sooner rather than later.
Does maintenance required mean oil change?
Since
the maintenance required light has no way to determine the condition or level of the engine oil
, it’s important to bring your car into a trusted auto shop to make the needed service changes.
How do I turn off the maintenance light in my Lexus?
- Turn on your engine.
- Flip your Odometer/Trip Display to ODO mode or TRIP A mode, depending on the model.
- Turn the ignition switch off.
- Hold the Trip Meter Reset button while turning the ignition switch back on.
- Wait for the maintenance light to blink, turn solid, and then turn off.
How do you turn off the maintenance required light on a Toyota Tacoma?
- Start with your car off.
- Press and hold the odometer reset button. It is located on your dashboard.
- With the reset button still depressed, turn your car on and off again.
- When you’ve turned your car off again, release the reset button. When you turn your car on again, the light should be gone.
How do I turn off the maintenance light in my Toyota?
Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash
. You might even hear beeping noises. The light should go out.
Can you pass smog with maintenance required light on?
You can’t pass a vehicle inspection with the maintenance light on
. If an inspector sees this on, they can easily find the issues and fail you—so don’t try and hide it. The only way to pass inspection after failure is to get the proper repairs done.
Will my car pass smog if maintenance required light is on?
Get Rid of Your Check Engine Light
If your check engine light is on, you’ll automatically fail your smog test. In the State of California,
your auto mechanic cannot refuse to test your car if they see the light on
.
Is the maintenance required light the same as check engine?
The simplest explanation for the difference between a check engine light and service light is
the former indicates a major problem and the latter indicates a need for maintenance or regularly scheduled service
.
Why is my maintenance required light flashing when I start my car?
It’s basically just telling you that
your car will need some kind of scheduled service soon
. It could be an oil change, a tuneup, or maybe you need a new timing belt. When the light begins to flash at startup, you have about 500 miles or so to go before the next scheduled service.
Why is my maintenance required light on after oil change Honda?
If your engine maintenance light has come on before it’s recommended scheduled 5,000 mile oil change,
the Maintenance Minder system has predicted early breakdown of the additives in your oil based on use and engine conditions
.
Why is my maintenance light on after oil change?
The light could be on after an oil change because of
an issue with the oil pump
. If this is the cause, there could be not enough oil circulating through to the various parts. Performing regular oil changes should help prevent this from happening, but parts do wear out.
Can I drive my car with the maintenance light on?
This light is turned on automatically every 5,000 miles as a warning sign, so you don’t forget to change the oil in your car. It’s important to know that the light itself doesn’t mean that your car is damaged, so
you can still safely use your vehicle while the light is on in your dashboard
.
How long do I have when my car says oil change required?
WHEN TO GET AN OIL CHANGE
Due to this, cars can generally go
5,000 to 7,500 miles
before needing an oil change. Furthermore, if your vehicle uses synthetic oil, you can drive 10,000 or even 15,000 miles between oil changes.
When should I change oil after light comes on?
On vehicles with an oil change light, an oil change is needed
when the light remains on after startup
. It’s best to schedule the oil change within one to two weeks. If you primarily do highway driving, you have a little more breathing room than city driving.
What does oil maintenance required mean on a Lexus?
When the Lexus Maintenance Required light appears on your dashboard, it means that
your vehicle is due for an oil change, tire rotation, or other routine maintenance task
. This usually occurs every 3,500 to 5,000 miles, depending on your Lexus model.
What does a red indicator light on the dashboard mean?
Red warning lights mean
you should stop the car as soon as it’s safe
. Yellow warning lights mean that action is required.
What is routine maintenance required?
Routine maintenance are
maintenance activities such as regular inspections or machine servicing
. Routine maintenance is done on a regular basis, whether that be daily, weekly, monthly, or yearly. Routine maintenance is an important part of keeping systems up to date and functional.
How do you turn off the maintenance required light on a Lexus is350?
How do you turn off the maintenance required light on a 2013 Lexus RX 350?
How do you turn off the maintenance required light on a 2015 Lexus RX 350?
How do I turn off the maintenance required light on my Toyota Highlander?
Resetting Maintenance Light on Toyota Highlander
Quickly push and hold the odometer button on your dashboard, then turn your key to position two.
Continue to hold the odometer buttonfor about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.
