How Do I Program My RCA Remote To My DVD Player? - Fixanswer

Manually turn on your TV.
Aim your remote at the TV panel and press and hold the TV button.
Once the light is turned on, at the same time, press and hold the “On/Off” button until the light turns on again.
Press the Play or the Slow button on your remote for five seconds.

What are the codes for a RCA universal remote?

Abex TV 1172.
Admiral TV 1001 , 1046 , 1047 , 1083 , 1095 , 1173 , 1191 , 1211.
Admiral VCR 2001.
Advent TV 1005 , 1062 , 1219 , 1238 , 1291.
Adventura TV 1174.
Adventura VCR 2026.
Aiko TV 1016.
Aiko VCR 2027.

Where is the code search button on a RCA universal remote?

You’ll need to keep the remote pointed at the device as you program. Press and hold the Code Search button until the light turns on. This button is

usually at the top of the remote

. When the light comes on, you can let go of the button.

How do I connect my remote to my DVD player?

Press and hold the button on the

universal remote

that matches the device you’re pairing (e.g. if it’s a DVD player, press the DVD button). The light on the remote will blink once and then stay steady.

How do I program a universal remote without a code?

Common method #4:

Press and hold the power button and device key

simultaneously until the LED blinks or remains lit, then release and repeatedly press the power button until the device turns on or off, then press the device key (sometimes the stop button) to save the setting.

How do I program my RCA universal remote to my converter box?

Manually turn on the component you wish to program the remote to operate. Find the four-digit code for your brand of TV, VCR, DVD, satellite receiver, cable box, or digital TV converter in the enclosed code lists.

Press and hold the CODE SEARCH key until

the indicator light turns on. Release the CODE SEARCH key.

How do I program my 3 RCA universal remote?

Manually turn on the device you want to control. …
Press and hold the DVD•VCR key. …
Find your device’s brand in the Brand Code list section of the accompanying code list. …
Press and hold the device key you want to program. …
Wait until the POWER key comes on and stays on.

How do I setup my universal remote to my TV?

Turn on your TV or another device you wish to control. Press and hold the

corresponding DEVICE and POWER buttons on

the remote at the same time. Wait until the power button comes on and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.

How do you pair a universal remote?

Turn on your TV or another device you wish to control. Press and hold the

corresponding DEVICE and POWER buttons on the remote

at the same time. Wait until the power button comes on and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.

How do I find the code for my universal remote?

Look through the User’s Manual for your remote control to find the code section. …
Go to an website listing code, such as the Remote Code List (See References). …
Call the manufacture of your remote and ask whether it can tell you the codes you need.

What is an RCA revision number?

If you don’t know the revision number, you can find it

by opening your battery cartridge and removing your batteries

. Once you do, you should see a sticker inside with several numbers. The first one is your model number, ignore that for now. Just below the model number should be the revision code.

How do I program my RCA universal remote to my Philips TV?

Manually turn on your TV.
Aim your remote at the TV panel and press and hold the TV button.
Once the light is turned on, at the same time, press and hold the “On/Off” button until the light turns on again.
Press the Play or the Slow button on your remote for five seconds.

Can you program any remote to any TV?

Connecting a remote to a TV requires a clear path so the TV can receive the signal the remote lets out during the programing process. Universal remotes use 3-digit codes to sync to different TVs, but not all the codes listed will work. You must complete a process using different codes if the first try doesn’t work.

How do I program my RCA remote with code search?

Press and hold the Code Search button on the remote

. While still holding the Code Search Button, press the button on the universal remote that matches the equipment you’re pairing (e.g. if it’s a sweet new flat screen TV, press the key for TV). The light on the remote will blink once and then stay steady.

How do I program a universal remote control code?

Turn on your TV or another device you wish to control.
Press and release the DEVICE button on your remote that is associated with the product you want to control (TV, etc.). …
Press the Device Button again, as well as the POWER button at the same time. …
Release both buttons.