- Find your TV Brand in the chart below and its corresponding number.
- Press and hold the OK and Menu key at the same time for three seconds until the Power key flashes red twice to confirm you are in program mode.
- Press On Demand to program the TV code.
How do I reset my AT&T remote control?
- Press and hold the AT&T and the OK key simultaneously.
- Release both keys and all four mode keys will flash twice to indicate you are in programming mode.
- Enter programming code 900 by pressing the number keys on the remote control.
Where is the ATT button on S30 remote?
Check the batteries – When you press the AT&T button located at the top of the remote control , the button should shine brightly. If the button does not shine, change the batteries.
How do I program my ATT Uverse remote to my cable box?
Choose Settings and then System. Select Remote & Devices, then Program Your Remote. Choose the TV manufacturer or sound bar you want to add. Follow the prompts to finish up.
How do I program my ATT remote to my TV?
Press and hold the mode button you want to assign to the equipment (TV, DVD, or AUX) along with the Enter button. Hold both buttons for one second, and then release. The four mode buttons on the remote control will flash twice to indicate you’re in programming mode.
How do I reset my ATT Uverse S30 s1b remote?
- Press and hold the AT&T and the OK key simultaneously.
- Release both keys and all four mode keys will flash twice to indicate you are in programming mode.
- Enter programming code 900 by pressing the number keys on the remote control.
How do I get my volume to work on my AT&T remote?
- Press Menu.
- Scroll down to Help and press OK.
- Select Information > Troubleshoot & Resolve > TV > Sound.
- Select the Sound issue.
- Follow the onscreen prompts.
Why is my remote control not working?
Clean the remote control terminals . The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.
How do I connect my uverse remote to my TV?
Power on the device to be programmed. Press and hold the mode key that matches the device you want to program, TV, DVD, or AUX, along with the OK key. Hold both keys for one second, then release. The four mode keys on the Remote Control flash to indicate you are in the programming mode.
How do you program a remote?
Turn on your TV or another device you wish to control. Press and hold the corresponding DEVICE and POWER buttons on the remote at the same time. Wait until the power button comes on and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.
Why is my ATT TV remote volume not working?
Check the volume level and mute settings on your TV and any audio-visual (A/V) receivers you may have. Check audio settings on your device using your remote: Press the Home button, then Settings > System > Remote & Devices > Program Your Remote > Advanced Remote Program > Switch Volume Control.
Why does my AT&T remote keep flashing?
If TV programming is interrupted or inactive for more than 10 seconds , the “POWER” key will flash one, long, red blink and exit programming mode. This means the remote has returned to normal operation without saving changes.
Where is source button on AT&T remote?
Navigate your AT&T TV remote. Starting at the top of your AT&T TV remote , you’ll find 3 buttons. The one on the left is ON, the middle is INPUT, and the right is OFF. Use the middle INPUT button to scroll through and select the equipment connected to your TV.
Where is the home button on my AT&T remote?
- The GUIDE button is on the left. Use it to find shows currently airing. ...
- The home button is in the middle. It displays the home screen.
- The LIST button is on the right. Use it to display your library and DVR recordings.
Where is enter button on ATT Uverse remote?
The button in the center is the “Enter” button and it allows you to select the highlighted menu option. Look at the buttons at the very bottom of the remote control.
Why is my remote not working even with new batteries?
The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.
