How Do I Replace My Epson Ecotank Maintenance Box?

1. Remove the new maintenance box from its package. …
2. Using a flat-tipped screwdriver, remove the screw on the maintenance box cover and remove the cover.
3. Remove the used maintenance box. …
4. Place the used maintenance box in the plastic bag that came with the new maintenance box.

How do you replace a maintenance box?

1. Remove the new maintenance box from its package. …
2. Open the document cover.
3. Open the control panel.
4. Loosen the screw with a flat-head screwdriver until the maintenance box cover comes off the printer.
5. Remove the maintenance box cover.
6. Remove the used maintenance box.

Where is the maintenance box on an Epson printer?

How often do you replace Epson maintenance box?

When an ink cartridge is expended or the maintenance box is at the end of its service life

, you need to replace it. You may also need to replace a cartridge that is more than six months old if your printouts do not look their best, even after cleaning and aligning the print head.

Can Epson maintenance box be reused?

Caution:

Do not reuse a maintenance box that has been removed and left uninstalled for more than a week

. Keep the maintenance box away from direct sunlight. Note: You cannot print or clean the print head while the maintenance box is full, but you can perform tasks that do not require ink, such as scanning.

How do I change the maintenance box on my ET 7750?

How do I clear my Epson maintenance tank?

1. Turn off printer.
2. Hold down the three leftmost arrow buttons: [left-arrow] [down-arrow] [up-arrow]
3. Turn on printer.
4. Release buttons.
5. New menu appears.
6. press up/down arrows to get to the “Clear Counters” menu.
7. press RIGHT.
8. press up/down arrows to get to the “Maintenance Tank” menu.

How do I reuse my Epson maintenance tank?

Fold 3 paper towels together to loosely fit in the bottom of the empty tank (replace ink soaked pads every time the chip is reset to avoid overflow). Reattach the plastic grid, making sure it fully snaps onto the base with thick “Epson” end facing the outside (same way it was removed).

Can I reuse maintenance box?

Do not reuse a maintenance box that has been removed and left uninstalled for a long period

. Keep the maintenance box away from direct sunlight. Note: The maintenance box is a user-replaceable part and is not covered by the product warranty.

How do I know if my Epson maintenance box is full?

You can check the status of your maintenance box using your product’s LCD screen.

Press the home button, if necessary. Select Maintenance > Maintenance Box Service Life and press the OK button

. You see the remaining ink capacity of the maintenance box.

How do I change the maintenance box on my Epson ET 4750?

1. Press the power button to turn off the product.
2. Remove the new maintenance box from its package. …
3. Press the tabs and remove the duplexer (rear cover).
4. Grasp the maintenance box as shown and pull it out of its holder.

What is maintenance box service life on Epson printer?

Maintenance box is

at the end of its service life

. You need to replace it. You must replace the maintenance box to continue printing. A printer’s ink pad is nearing the end of its service life.

How do I change the maintenance box on my Epson WF 4720?

1. Make sure the product is not printing.
2. Remove the new maintenance box from its package. …
3. Press the tab on the maintenance box cover and remove it.
4. Grasp the maintenance box as shown and pull it out of its holder. …
5. Place the used maintenance box in the plastic bag that came with the new maintenance box.

Does the Epson ET 2720 have a maintenance box?

The Epson EcoTank ET-2720 All-in-One Supertank Printer

do not have a replaceable maintenance box

. This product uses an ink pad to collect, distribute, and contain the ink that is not used on printed pages.

How do I change the maintenance box on my Epson XP 6100?

Open the front cover and pull on it to slide out the lower paper cassette. Raise the control panel. Use a flat-head screwdriver to loosen the screw on the maintenance box cover as shown, then remove the cover. Grasp the maintenance box as shown and pull it out of its holder.

How do I reset my Epson 7800 maintenance tank?

1. Turn off your Epson Stylus professional printer but leave its power cable connected. …
2. Hold down the left, up and down arrow keys next to the printer’s LCD display at the same time.
3. Press the power button to turn the printer on while still holding down the three arrow keys.

How do I change the maintenance box on my ET 3750?

Can you reset Epson maintenance box?

The Maintenance Reset Utility can only be used once and will allow printing for a short period of time

. You may download the Maintenance Reset Utility when you receive the following message on your PC: A part inside your printer is at the end of its service life. Click the link below for details.