How Do I Reset My Viper Remote Start?

by | Last updated on January 24, 2024

, , , ,
  1. Point the fob key toward your vehicle as the alarm sounds.
  2. Listen and wait for your alarm to sound for six seconds. Press the lock button on your key. Your vehicle’s Viper alarm will reset but the alarm will still be armed.

What would causes a remote start to stop working?


Hood Pin Switches Or Sensors

The single biggest thing that can cause a remote starter not to engage is a faulty or missing hood switch. This device gets installed under the hood of your vehicle and prevents the engine from starting when the hood is up.

Why does my Viper remote start not work?

If the procedure mentioned above does not work

simply turn the key off then back on and press the valet switch two times

. If this does not work turn the key off then back on and try it three times. Continue this up to five and one of them should disarm the alarm.

What do you do if your remote start doesn’t work?

Double check

your engine coolant and oil temperatures

: If the engine coolant temperature is too high or the oil pressure is too low, remote start is disabled! After you have let the car cool down for 5-10 minutes and rechecked the levels, retry the start procedure.

How do you start a car with a Viper remote start?


Press the “Star” key to auto-start your

vehicle. This will also turn off your engine if it’s running. Open the vehicle door, press the lock button, the unlock button and the lock button again to enter “Valet Mode.” This disables the alarm. The LED at the top of the remote control remains lit whilst in “Valet Mode.”

How do you reset a remote start?


Press the Lock button on

your remote car starter. Within five seconds of turning it on, turn your key back to the “off” position (or press the start button again). Repeat the on-off cycle three more times—you’ll do four in total.

What is valet mode Viper remote start?

What is Valet Mode? We all need to let other people operate our vehicle at some point or another. Whether it’s a valet at a restaurant or a mechanic at your local garage. With valet mode,

you can disarm your alarm and hand the keys over without

the worries of handing over your alarm system.

Will a weak battery cause remote start not to work?

If your remote starter were to completely shut off and not use ANY battery power, then

it would be impossible for the system to receive and execute

a lock or remote start command sent from your remote. … However, it is still possible for a remote car starter to consume too much power from your battery.

Do remote starters go bad?

Remote starters increase engine wear and tear. This is a common misconception about remote starters. It’s unclear why people are lead to believe this is the case, but it’s untrue. The consensus among mechanics is that

remote starters are good for your engine

, especially for people with turbos or diesel engines.

How do I know if my vehicle has remote start?

Check your vehicle’s key fob

The key fob for your car will have a special button if your vehicle has a remote starter. The symbol for the remote start is usually

an arrow making a partial circle

, as seen above. However, take note that some vehicle brands might use a different symbol for remote start.

What is the valet button on my remote?

The valet button or switch

permits the owner to temporarily bypass the alarm functionality of the system

. To enter or exit valet mode, disarm the system with a working transmitter, your personalized manual override code, or using the procedure below which is to enter or exit valet mode.

Why is my auto stop not working?


The outside temperature is too high or too low

. If the battery needs too much power to supply the fan, the start-stop function is switched off. When, and whether this happens, depends on the comfort settings by the particular car manufacturer. … The engine temperature is too high or too low.

How can you start a car with a bad starter?

  1. Begin with Examining the Connections. …
  2. Examine the Engine Ground Connection. …
  3. Examine the Solenoid Cable of the Starter. …
  4. Check for Corrosion. …
  5. Softly Thump the Starter with a Hammer. …
  6. Jump Start the Car. …
  7. Push the Car to Start. …
  8. Examine the Flywheel of the Engine.

How much is a Viper remote start?

This item Viper 4105V 1-Way Remote Start System Viper 3100V 1-Way Security System Customer Rating 4.2 out of 5 stars (437) 4.5 out of 5 stars (229) Price

$99 99

$64.00$64.00
Sold By Avenue Sound STEREOSOUNDSYSTEM Color Black black

Is there an app to lock and unlock your car?


The myChevrolet App

can also be used to unlock your car keys if you’re in a bind. The mobile command center transforms your mobile device into a makeshift remote key fob, allowing you to remote start, stop, lock, unlock, and even activate the horn on your vehicle. Download the myChevrolet App on Apple iOS or Android.

How long does Viper remote start?

Any vehicle started with the remote engine starter can idle for a

total of 20 minutes

. Automatic engine shutdown occurs after 10 minutes, but the vehicle may be remotely started as many times as you wish for an additional 10 minutes.

Timothy Chehowski
Author
Timothy Chehowski
Timothy Chehowski is a travel writer and photographer with over 10 years of experience exploring the world. He has visited over 50 countries and has a passion for discovering off-the-beaten-path destinations and hidden gems. Juan's writing and photography have been featured in various travel publications.