- Locate the “Energy Saver/Dry” button on the dishwasher. …
- Press and hold down this “Energy Saver/Dry” button for at least four seconds.
- Check to make sure that the child lock indicator light has turned off.
How do I get my dishwasher out of control lock?
To turn off Control Lock,
press and hold the Options key that
says “Control Lock Hold 3 Sec” under it for 3 seconds. If the dishwasher has a dedicated Control Lock button in the Options selections, press and hold CONTROL LOCK for 3 seconds.
How do I turn off the control lock on my KitchenAid dishwasher?
Press and hold the designated control lock button for your model for 3 seconds
. The location of the control lock button may vary depending on your model. Refer to the Owner's Manual for the control lock button location for your model. The light will turn off and the control will be unlocked.
How do you reset the control panel on a KitchenAid dishwasher?
Hit the Hi-temp Scrub and Energy Saver Dry buttons individually until each button has been hit at least five times.
Let the unit settle for ten minutes
to allow it to reset. Once you are done pressing the reset sequence, expect to see the lights on the display panel flash.
How do I get child lock off my dishwasher?
To turn off Control Lock,
press and hold the Options key
that says “Control Lock Hold 3 Sec” under it for 3 seconds. If the dishwasher has a dedicated Control Lock button in the Options selections, press and hold CONTROL LOCK for 3 seconds.
What is the control lock on a KitchenAid dishwasher?
The control lock is
used to avoid unintended use of the dishwasher
as well as to avoid unintended cycle or option changes during a cycle. The control lock light will stay on for a short time, indicating that it is activated and all buttons are disabled.
Find the control lock button
on the dishwasher's keypad
.
These buttons will either be above or on top of the door, depending on the dishwasher model. Some other buttons to try include “Proscrub Upper” and “Bottle Wash” if your dishwasher has them. Mostly, though, Kitchenaid dishwashers use a control or delay button.
What is control lock on dishwasher?
Control Lock is
used to avoid unintended use of the dishwasher between cycles
, or cycle and option changes during a cycle. The red lock indicator shows that the control lock is activated, and the control panel cannot be used while this is activated.
Why does my dishwasher say locked?
When the unit gets stuck in Lock mode, it's often
because one or more of the control buttons is stuck
. There's a simple strategy for resolving this problem, but if it doesn't work, you may have to replace the control panel.
How do you unlock the control lock on a KitchenAid stove?
To unlock the control panel,
press and hold CONTROL LOCK for 3 seconds
. The indicator light will turn off, and the appliance is ready for use.
How do you run a diagnostic test on a KitchenAid dishwasher?
Search for your model number to find a complete list of parts for your dishwasher. Digital display models show the error codes on the control panel. Models without a digital display signal error codes by
flashing the Clean light in a pattern unique to
the error.
Can you reset your dishwasher?
Yes
, you can reset your dishwasher by pressing the Start/Reset button on the appliance and waiting a few minutes. If your dishwasher still doesn't start, you may need to reboot the entire system by turning off power to the appliance at the house circuit breaker or fuse box.
How do I reset my dishwasher control panel?
How Do I Reset My Dishwasher Control Panel?
Simply unplug your dishwasher. Wait for one minute, then plug it back in again
, to reset the dishwasher control panel.
How do I turn off control lock?
The control lock on a dishwasher is intended to
“lock” the control from unintended use
. It can be used while the dishwasher is operating or not. This is perfect for the household with children who like to touch buttons so the dishwasher cannot be turned on accidently or turned off when running.
How do I get the child lock off my Frigidaire dishwasher?
- To prevent children from accidentally changing the dishwasher settings or starting the dishwasher, you can lock the controls.
- Press and hold DELAY START for 3 seconds. …
- To unlock the controls, press DELAY START again for 3 seconds, and the indicator light will go out.
How do you unlock the control lock on a Maytag dishwasher?
Press and hold the designated control lock button for your model for 3 seconds
. The location of the control lock button may vary depending on your model. Refer to the Owner's Manual for the control lock button location for your model. The light will turn off and the control will be unlocked.
