How Do You Change A Drive Belt On A Harley-Davidson?

by | Last updated on January 24, 2024

, , , ,
  1. Place the Harley onto a motorcycle stand to get the rear wheel off the ground. Use a wrench to remove the rear wheel axle. …
  2. Remove the belt guards with the ratchet set. …
  3. Place the new drive belt on the transmission and rear wheel sprocket.

How much does a Harley-Davidson drive belt cost?

The belt part number is 40024-07, it’s 1′′ wide and 137 teeth, and MSRP is

$221

. You can find them for around $180 from the discount Harley dealers.

How long does the drive belt last on a Harley?

Because a drive belt can last

up to 100,000 miles

before needing replacement, riders may lose track of this important part of motorcycle maintenance.

How do I change a motorcycle belt?

But even veteran enthusiasts can make the mistake of forgetting to look after their bike’s drive belt, which is strong, stretch-resistant and made from tensile cords. Because a drive belt can

last up to 100,000 miles

before needing replacement, riders may lose track of this important part of motorcycle maintenance.

How often should you change a drive belt on a Harley-Davidson?

But even veteran enthusiasts can make the mistake of forgetting to look after their bike’s drive belt, which is strong, stretch-resistant and made from tensile cords. Because a drive belt can

last up to 100,000 miles

before needing replacement, riders may lose track of this important part of motorcycle maintenance.

Is 25000 miles alot for a Harley?

For sports bikes,

25,000 miles can be a lot

. Harley-Davidson® motorcycles are built to last much longer. … Some sources say “average” motorcycle use is between 2,000 and 3,000 miles a year, with mileage on touring bikes in the 5,000 to 6,000 mile range.

What is high mileage on Harley?

For sports bikes,

25,000 miles

can be a lot. Harley-Davidson® motorcycles are built to last much longer. If a bike has good maintenance records, no signs of damage and no oil leaks, even a bike with 40,000 to 50,000 miles can be expected to last a long time.

Why do Harleys use belt drives?

There are good reasons to adopt belt drive:

It requires no lubrication, lacks the sound of a roller chain

, and cannot stretch because it doesn’t have a chain’s 100 or more joints to wear. So why back to chain on this new “adventure-touring” model?

How much does Harley charge to replace clutch?

How much does Harley charge to replace clutch? Air filter replacement cost on Harley-Davidson is estimated at $100 to $200, whereas the ‘Brake Pad’ needs $250 for the replacement. Clutch replacement cost is

$200 to $450 on average

.

How do you use the tension belt on a Harley-Davidson?

With the rear wheel on the ground and one rider sitting on the motorcycle, use the BELT TENSION GAUGE (Part No. HD-35381) to apply

10 lbs. (4.5 kg) of force at the midpoint

of the bottom belt strand. Belt deflection should be 5/16-3/8 in.

How long does a motorcycle belt drive last?

Modern drive belts are strengthened with steel wires inside and Kevlar coating outside – such belt systems can last really long. You can expect a well maintained belt drive on a motorcycle to last

in excess of 100,000 km or even more

.

What year did Harley go to belt drive?

From

1992

, rubber tooth-belt drive was adopted for all Harley-Davidson streetbikes.

What’s better chain or belt driven motorcycle?

Compared with a chain,

belts

are cleaner, lighter, cheaper, smoother, quieter and require less maintenance or adjustment than chains. … Kevlar and carbon fibre belts extended the life of the drive belt so it can last the life of the motorcycle. That makes them cheaper in the long run.

Do Harleys break down a lot?

Harleys break down for several reasons. A major reason is

the predisposition of Harley owners to modify their motorcycles excessively

. Often, people perform these modifications without expert guidance and cause problems for the bikes later on. There is also the failure of Harley owners to maintain their bikes properly.

Is 40000 miles a lot on a Harley?

Motorcycles with

more than 40,000 miles are considered to be high-mileage bikes

, but if it has been well maintained, the mileage could still make it a good purchase. … Anything above 25,000 miles on a sports bike is considered high.

Is 20 000 miles a lot for a Harley?

Having said that, I wouldn’t hesitate to buy a well maintained Harley with 15,000-

20,000 miles

. Only thing is, the more miles the more important it is to know the owner and how they cared for it.

David Evans
Author
David Evans
David is a seasoned automotive enthusiast. He is a graduate of Mechanical Engineering and has a passion for all things related to cars and vehicles. With his extensive knowledge of cars and other vehicles, David is an authority in the industry.