How Do You Change The Rear Brake Pads On A Ford C Max?

1. Position vehicle onto lift.
2. Switch the vehicle off and remove the key from the ignition.
3. Remove rear wheels.
4. Release park brake.
5. Remove park brake cable (1) and caliper retainer (2).
6. Using the correct size spanner remove the caliper mounting bolts (4), and free the caliper from the hub section .

Is it harder to change rear brake pads?

Although changing brake pads seems simple in theory, it can quickly turn into a

complicated

project. There are a myriad of things that can go wrong with your brake job, which may require additional tools or parts that you don't have on hand. Modern cars are becoming increasingly complex.

How do you change rear brake pads with electric handbrake?

To remove the rear brake pads, you need

to compress the caliper piston first

. You won't be able to do this if parking brake is set. You would be “fighting” with the actuators to compress the pistons. If you try to compress the pistons while the actuators are pushing them out, you may cause damage.

Can I just replace rear brake pads?

You can replace your brake pads in pairs

(the front or the rear) at the same time or separately. … It's also important to note that your front and rear brake pads wear at very different rates. The front brake pads do most of the work, causing them to wear faster and need replacement more often.

How do you remove rear brake pads?

1. Remove the wheel.
2. Remove the slider bolt.
3. Pivot the caliper up.
4. Slide out the old brake pads.
5. Replace the retaining clips.
6. Slide in the new brake pads.
7. Retract the pistons.
8. Monitor the brake fluid level.

What is different about doing rear brakes on a vehicle with an electronic parking brake?

Each parking brake actuator

connects to a gear that can force out the caliper piston

. When activated, the parking brake actuator can turn that gear. When that happens, the piston pushes the brake pads against the rotor. In other words, this system enables the rear brake pads to act as the parking brake when activated.

Should parking brake be on when changing brakes?

You should

have the parking brake cable released at all times when turning back the pistons

. Once the new pads are installed and caliper is installed then pump the brakes using only short strokes. Do not push the pedal all the way down or master cylinder may be damaged.

How long does it take a mechanic to change brakes?

Due to the fact that various components that make up the brake system are subject to wear and tear, they will need to be replaced. This process can take expert mechanics anywhere from

thirty minutes to one hour

. This is according to an expert opinion.

How much does a brake pad change cost?

The average brake pad replacement costs

around $150 per axle

, but these costs can rise to around $300 per axle depending on your vehicle's brake pad materials. The least expensive brake pads use organic material.

How much does a brake change cost?

A complete brake repair — one that includes pads, rotor and caliper replacement — typically averages

between $300 and $800

. However, depending on the make and model of your vehicle, you can easily spend more than $1,000 on a complete brake job.

Should you replace all 4 brake pads at once?

But, when changing brake pads, should you do all four at once? Well, first,

you absolutely should replace both front or both rear brake pads at the same time

. Unless something's really wrong, one should be wearing out at about the same rate as the other.

How long do rear brake pads last?

Many car manufacturers estimate that a braking pad can last anywhere from 20,000 to 70,000 miles. However, on average, most car owners replace their brake pads after

about 40,000 miles

.

Why do rear brake pads wear faster?

Usually, it's the front ones that wear faster, NAPA explains. That's because braking shifts the car's weight forward, which means the front rotors need to be stronger, NAPA explains. But there is a reason why rear brake pads can wear faster than expected:

traction control and electronic stability control

.

How do I turn my parking brake off?

To turn off brake hold:

Press the brake pedal and press the BRAKE HOLD button again

. Activating the automatic brake hold system on steep hills or slippery roads may still allow the vehicle to move if you remove your foot from the brake pedal.

How do you release the e brake?

Pedal – The pedal emergency brake is a small pedal that is positioned on the floor and to the left of the gas, brake and clutch pedals. Press down on the pedal until you hear it click to engage it.

Pull the lever above the foot pedal to release the brake

.

Is electronic handbrake safe?

Electronic parking brakes with ‘auto-hold' enable the brakes to be applied in an emergency.

This system is considered safer than traditional handbrakes

, particularly when operated at speed. Applying manual brakes at speed could result in losing control of the vehicle.