You can clean your soapstone after
the mineral oil treatment using any household cleanser such as Ajax or Comet
. Usually just wiping the soapstone with soap and water works just fine. A soapstone sink will stand up to any mild cleaner.
What is the best way to clean soapstone?
- Put a few drops of dish soap into a bucket of warm water.
- Using a clean sponge, wipe your soapstone countertops completely.
- Rinse the sponge or use a clean cloth to wipe any excess soap from the countertop.
- Allow to dry.
Does mineral oil soak into soapstone?
Little to none
. An optional periodic treatment with mineral oil (simply wiping the surface with a lightly oiled cloth) accelerates the natural darkening process. … As soapstone is nonporous, the oil does not actually penetrate the stone surface, but a light wiping accelerates the natural darkening process evenly.
Can you clean soapstone with vinegar?
Simple soapstone and water or vinegar and water. Will work wonderfully well and clean any surface bacteria just as well as bleach or harsh cleaners.
How do you get stains out of soapstone?
Pour mineral oil onto a clean cloth
, and rub the cloth over the soapstone surface. Make sure the surface is covered with a thin layer of mineral oil, and let it seep into the surface. Repeat this process every eight weeks to prevent new stains from showing up.
Is soapstone hard to maintain?
Ease of cleaning and maintenance
Since
soapstone is non-porous
, it is easy to clean. However, you need to use mild soap and a soft sponge. When it comes to maintenance, soapstone countertops need regular oiling to maintain their natural look.
How often should you wax soapstone?
Some homeowners apply
once a month for a year or two
, some repeat just three times and are satisfied with the results.
What kind of mineral oil do you use for soapstone?
The type of mineral oil you can buy in your local grocery store is just fine. The
thin or light weight mineral
oil goes on more easily than the heavier or full bodies oils, but they both do the same thing which is coat and enhance the natural color of the stone underneath.
Do I have to oil soapstone?
While many homeowners choose to oil soapstone to enhance its natural color and movement,
this is not necessary
. … Whether you choose a soapstone that is dark and moody or light and smooth, your countertops will be beautiful, durable, and easy to maintain for years to come.
How long does it take for soapstone to darken?
Soapstone Countertop Care
Enhance your counter’s natural darkening progression by applying mineral oil to the surface every week or two and rubbing it in thoroughly. The mineral oil treatment will make the patina more uniform. It usually takes
seven to nine months
for the countertop to reach its full patina.
Is it safe to mix vinegar and Dawn dish soap?
The combination of dish soap and vinegar is highly effective for a few different reasons. … However, vinegar alone will simply run off of most surfaces, while dish soap is too thick to use as a spray. But when you mix them together, you get an effective,
sprayable cleaner
that sticks to any surface!
How can you tell if soapstone is real?
- Scratch the surface of the stone with your fingernail. Soapstone is very soft; it is assigned a rating of 2 on the Mohs Hardness Scale. …
- Rub the stone. There should be a waxy, soapy feel to the surface of the stone, whether it is polished or not. …
- Judge the stone’s temperature.
Can you use rubbing alcohol on soapstone?
Soapstone naturally darkens over time on its own. … You do not have to commit to oiling soapstone the day it is installed.
You can remove oil from the surface with rubbing alcohol
or acetone if you have an accidental oil spill on an un-oiled counter without any negative effects.
Should I seal my soapstone?
Soapstone is non-porous and, unlike marble and granite,
does not need to be sealed
. You can purchase our special formulated Soapstone Care Mineral Oil from our online store.
Can you drill soapstone?
Relative to other stones, soapstone is
soft enough that it doesn’t require special tools to machine it
. You likely already have what you need to cut and shape it: a circular saw, a jigsaw, a drill/driver, a grinder, and a sander.