Models prior to 2002 have a drain plug located in the radiator. You may need to remove any plastic shields or screens in order to spot the plug. On models after 2002, it is located at the bottom of the engine block. You can also drain the radiator by
removing the lower coolant hose
, although this can get quite messy.
Where is the radiator drain plug?
Hello, the radiator drain plug will be
a the bottom edge of the radiator, facing the engine (passenger side)
. If you drain the coolant, be sure to catch it with a pan of some sort, and properly dispose of it. It will poison animals, and contaminate ground water.
How do you drain coolant out of a radiator?
- STEP 1 – Safety first. …
- STEP 2 – Press down on the radiator cap, slowly turn it counter-clockwise until it hisses, wait until the.
- STEP 3 – Place a large container under the drain valve at the bottom of the radiator. …
- STEP 4 – Loosen the drain valve and allow the coolant to completely drain out.
How do I completely drain my cooling system?
- STEP 1 – Safety first. …
- STEP 2 – Press down on the radiator cap, slowly turn it counter-clockwise until it hisses, wait until the.
- STEP 3 – Place a large container under the drain valve at the bottom of the radiator. …
- STEP 4 – Loosen the drain valve and allow the coolant to completely drain out.
How much antifreeze does a 2002 s10 hold?
The Chevy S-10 uses Dexcool Orange antifreeze engine coolant. It has a capacity of
about 12 quarts
.
Do you have to remove thermostat to flush coolant?
I’ll be sharing how I flushed our Toyota Innova’s cooling system without removing the thermostat. It is pretty easy but consumes a bit of time. So flushing
is done when coolant is heavily contaminated
or the system is dirty or whenever you’ll switch to a coolant with a different color or brand.
Can I do a coolant flush myself?
Remove the radiator cap and pour distilled water into the radiator until full. Replace the cap, then start up the vehicle and let it run for 10 to 15 minutes. This will work the distilled water into the engine, flushing out any loose debris or corrosion along with the last of the old antifreeze.
Can I use vinegar to flush my radiator?
Vinegar works well in removing these culprits because it is a mild
acid
that is safe to use on all metals. If you don’t want to pay someone to do a radiator flush, try using vinegar to get your car’s radiator back in good running condition.
Can flushing a radiator cause problems?
Can a radiator flush cause problems?
Yes and no
. Yes, because a radiator flush is going to flush out any corrosion, debris, rust, and other contaminants. … No, a radiator flush won’t cause problems if it is done correctly and flushes everything out as it is intended, then your car will run the same or better.
What is the best cooling system flush?
- Editor’s Pick: Prestone Radiator Flush and Cleaner. …
- Best Radiator Coolant Additive: Royal Purple Purple Ice Super Coolant. …
- Best Flush for Diesel Engines: Liqui Moly Radiator Cleaner. …
- Best for Oil-Based Cooling System: Irontite Thoroflush Radiator Flush. …
- Best to Stop Leaks: Bar’s Leaks 10-Minute Radiator Flush.
What kind of transmission fluid does a 2002 Chevy s10 take?
Valvoline Synthetic Transmission Fluid Dexron VI
1 Quart.
How do you drain the coolant on a Chevy s10?
Open the hood. Remove the
radiator cap
on the top of the radiator by turning it counterclockwise. After a half turn, begin pressing down on the cap. Continue pressing down and turning until the cap comes off the radiator.
What kind of coolant is Dexcool?
ACDelco GM OE Dex-Cool Antifreeze Extended Life Coolant Concentrate is an
orange, silicate and phosphate free, premium-grade coolant/antifreeze
that is formulated with a chemical composition that minimizes breakdown of metal components in contact with the fluid.
How can you tell if your coolant is clogged?
- Leaking coolant. Scroll to continue with content. …
- Discolored and thicker coolant. You know your coolant’s original color, don’t you? …
- Damaged water pump. …
- Excessively high gauge temperature readings. …
- Blocked, bent, or damaged radiator fins.
Is it OK to flush radiator with tap water?
You can
use tap water
, no problem. I recommend flushing the system as best you can with the hose, by pulling the right bottom hose off. Flush out as best as you can. Put the hose back on and fill the radiator.
What happens if you dont flush coolant?
If a mechanic has suggested you flush your radiator because you are experiencing difficulties with your car, such as leaks, steam, rapid overheating or
strange odors
coming from the hood, then not flushing the radiator will mean you will continue to have these problems and your car’s performance will suffer as a result …
