Check the knotter cam gear for wear and repair or replace as necessary. Twine tension is not correct because of a bottom Clean the bottom slacker arm and shaft. Check for slacker arm not rotating freely on the shaft obstructions. Dull or damaged twine knife Sharpen or replace twine knife.
How do you adjust twine discs?
Check the knotter cam gear for wear and repair or replace as necessary. Twine tension is not correct because of a bottom Clean the bottom slacker arm and shaft. Check for slacker arm not rotating freely on the shaft obstructions. Dull or damaged twine knife Sharpen or replace twine knife.
How does a knotter work?
1. After the needle has been threaded, the end of the twine is held in the twine disk by the twine holder. ... The gear teeth on the intermittent knotter gear then operates the disk driving pinion and turns the disk sufficiently to permit the twine holder to secure both strands of twine in the disk.
What is a hay dog?
A hay dog, when operating as designed, serves to hold the hay in place when the plunger returns to the front of the baler . Without the hay dog, the hay would push the twine out of the way of the twine fingers or tucker fingers, when the needles deliver the twine to the knotters, causing a mis-tied bale.
How do you tie a knot for a bailer?
- Pass the twine or cord around the roast. Tie an Overhand Knot with the working end around the standing line and pull tight.
- Tie a Half Hitch around the tag end of the first knot with the standing line. ...
- Pull both ends to tighten and trim the long end.
How much horsepower does it take to run a small square baler?
Most standard square balers on the market require 35 horsepower at your tractor’s PTO, and a minimum tractor weight of around 3000 pounds. That means that they cannot be run with today’s compact tractors.
What is a weaver’s knot?
A weaver’s knot joins two threads together in a knot that will secure your threads and allow you to continue weaving . ... I’m going to pop in an edit, as two people have pointed out, to finish the weavers knot tie it tight and then cut the ends really close to the knot.
How do you tie a fisherman’s knot?
The fisherman’s, or anchor, bend is an especially strong and simple knot that will not jam or slip under strain and can be untied easily. The knot is used to attach a rope to a ring, hook, anchor, or other object .
What is the function of Baler needles?
The baler knotter consists of needle for pulling the twine , a long arm that pushes it around the hay, and a mechanism that ties the knot. A baler knotter can produce single or double knots. The first action of a baler knotter is for the needle to move the twine to a holder.
Who invented the baler knotter?
Appleby knew that twine was the answer. He organized the Appleby Reaper Works in 1874 at Mazomanie, Wisconsin. After persistent experimenting, he patented the Appleby Knotter in 1878 and a binder in 1879. In 1881, Appleby sold his invention to Cyrus McCormick
How does a small square baler knotter work?
Operation of a Small Square Baler
Directly behind the pickup is the compressor bar , which holds the hay in place so the auger can feed it into the bale chamber. The bale chamber contains a plunger that drives in and out, each time packing and compressing hay into the desired shape.
How much HP do you need to pull a baler?
| Model PTO HP (Minimum) | 450E 55 hp | 450M / 450M Silage 55 hp | 550M / 550M Silage 55 hp | 460M / 460M Silage 65 hp |
|---|
How much horsepower does a round baler need?
If you are buying a baler first, keep horsepower requirements in mind when pairing with a tractor. PTO horsepower requirements for round balers start at 30 hp and can run up to 120 hp . There are a couple of different options when it comes to bale size in balers.
How does a tractor baler work?
The hay enters the baler through the pickup, and the teeth gently rake the hay from the ground to prevent the loss of leaves and ingestion of rocks or debris into the baler. ... The bale chamber contains a plunger that drives in and out, each time packing and compressing hay into the desired shape.
