Another popular way to connect an amplifier to a factory radio is to use something
called a line output converter
. It connects to the factory radio's speaker wires and converts the speaker-level signal to a preamp-level signal. This lets you use RCA cables to run that signal to your amplifier.
Can you hook subs to a stock stereo?
In techie terms: …it takes amplified speaker level signals and converts them into high quality preamp signals that can be fed into an amplifier. … So now you know – it's
definitely possible to install a subwoofer and amplifier
to your factory system, and still have it sounding good.
Can you hook up an amp and subs to a stock stereo?
If you are adding an amp and sub to a factory premium sound system with it's own stock subwoofer, you
must get your signal for the line output converter from
that subwoofer. … Adding an amp and subwoofer to a stock radio can be the easiest way to improve your stereo system in your car, if you do it correctly.
What do you need to hook up a subwoofer to a factory stereo?
- Subwoofer box.
- Basic toolbox.
- Speaker wires.
- Amplifier.
- Subwoofer speaker.
- RCA cables.
- A few small screws.
- Inline fuse of 50 amps or higher.
Will a sub work without an amp?
Subwoofers are designed to increase the bass frequencies, resulting in a deep, thumping sound. In most cases, they are paired with an amplifier to boost the sound. If you do not have the funds for both components,
you can still hook up a subwoofer without an amplifier
; it simply involves a little more know-how.
How do you hook up a subwoofer without an amp?
Mount your subwoofer in your preferred location
. Next, reroute the stereo and power supply cables to the subwoofer and connect them. If your audio system has an outlet for your subwoofer, connect this as well. Once installed, you need to learn how to get the best sound.
How do I add a subwoofer to my stereo?
A subwoofer with speaker-level inputs is especially easy to connect to your older amplifier or receiver! To do so, just
connect to the speaker outputs on the source unit using speaker wire and then to the matching inputs on the subwoofer
. You can even power speakers from the amp or receiver at the same time.
Can you connect a powered subwoofer to a speaker wire output?
2. Subwoofers with speaker level inputs. If you own a subwoofer with speaker level inputs you're in luck! You can connect these
directly to your receiver's speaker outputs
, either by themselves (on unused speaker terminals) or at the same time with speakers connected to the receiver.
Can you hook an amp up to a factory car stereo?
It's
possible to
add an amp to your car's factory audio system without having to buy an expensive new head unit (CD player). Adding an amp will make your audio system sound louder and clearer by allowing you to send more power to your factory speakers or sub-woofers.
Can a head unit power a sub?
If you are considering adding a subwoofer to your head unit,
the head unit can power it
. You can choose a location for the subwoofer where it produces the best sound. The subwoofer will help to bring out the deep sounds in your music. Although it will improve your sound, it won't do it as well as it would with an amp.
Can I hook a car subwoofer to my home stereo?
You can hook up a car subwoofer to a home stereo directly if: You
have a subwoofer or more than one subwoofer that can be wired for at least 8 ohms total
. This can be two 4 ohm subwoofers or a 4 ohm dual voice coil (DVC) subwoofer.
Will 1000 watt amp drain battery?
A 1000 watt Amp
won't drain your battery
, but a Capacitor is highly recommended.
Do you need an amp for aftermarket door speakers?
A: In most cases,
yes
. Aftermarket speakers will certainly sound better with a little more juice, but most of our speakers will sound just fine with factory power. … Low-efficiency speakers can sound great, but they'll need a high-powered receiver or amplifier for energy.
How do you hook up a subwoofer to an amp?
To get started with the actual hook-up, you'll connect the subwoofer to
the amplifier using the RCA cable
. If you want a stereo hook-up, you'll need two sets of RCA cables. Connect the subwoofer output to the amplifier input.
Should I add a subwoofer to my stereo?
Subwoofers are used in most home theater systems, but subs can also radically improve the sound of stereo systems — and not just the ones with small speakers. … So adding a sub is not just about adding more and deeper bass; rather, a
properly integrated subwoofer can improve the overall sound of the system
.
