How Do You Install An Intex Pool Pump? - Fixanswer

Place the Intex pool pump on a level area or surface, 2 feet away from the hose connection on the pool wall. Place the nozzle union into

the upper hose connection

. The upper hose connection is located on the filter part of the pump.

Where do pool pump hoses go?

The

second hose connects to the top of the

pump (behind the strainer housing) and goes to the port on the multiport valve labeled “pump”. This is usually a shorter, heavy duty hose that is different from the others. Slide the clamps over the end of the hose and install the hose on those fittings.

Do you have to plug in Intex pool pump?

Intex pools come in kits that include all parts and accessories that you’ll need. In most cases, you’ll

only need to plug the pump in to an existing GFCI outlet and connect two hoses

.

Why does my Intex pool have 3 holes?

The third hole is probably

for a pool filter

. My pump did not come with any hoses, so you will have to purchase any hoses needed. … The skimmer hose does not come with it, only the hoses for the pump.

What size hose does Intex pool use?

The Intex

1.5in

Accessory Hose is suitable for Intex filter pumps and saltwater systems that use 1.5in hoses.

How long should Intex pool pump run?

Run your filter pump for

at least 12 hours a day, every day

. This will make sure all the water in your pool circulates at least once. In an ideal world of bottomless money vaults, you could run your pool pump 24 hours a day, but 12 hours is a good compromise.

How often should you change the sand in a pool filter?

On average, sand should be replaced

every 3-5 years

. This may be longer if the pool stays clear, or shorter, if the filter runs all the time. The jagged edges of the sand wear down and become smooth as the sand ages.

How much electricity does an Intex pool pump use?

Your pump uses

600 watts an hour

. That costs $1.73/day @ . 12/kwh.

Can you plug an Intex pool into an extension cord?

For most smaller pools (such as Intex, Summer Waves, or Coleman temporary pools) the

12AWG extension cord

is fine. For larger pools, or pools with Saltwater systems, then we recommend the 10AWG extension cord.

Can I use an extension cord for my Intex pool pump?

It’s highly recommended never to use an extension cord to

power a pump of an above ground swimming pool. A pool pump requires a great deal of power and that you can’t provide with a normal extension cord. … If the wire isn’t thick enough, the extension cord would overheat and burn up.