How Do You Lock A White Rodgers Thermostat? - Fixanswer

If you want to lock the thermostat,

press and hold the buttons together for 5 seconds

. LOCK and 000 will be displayed on the screen. The first digit of your lock code can be entered by pressing the SpeedBar up or down.

How do you unlock a White Rodgers thermostat?

Force the thermostat to unlock if you do not know the keypad lockout code by

touching the “Menu” button and holding your finger there for approximately 20 seconds

. When you first touch the “Menu” button it will disappear. Keep your finger in the same location until the thermostat unlocks.

How do you lock an old thermostat?

Start with the System Mode switch in either the HEAT or COOL positions, and the Set Slide switch in the RUN position. Press and hold the NEXT button for 5 seconds, and the words “LOCK CODE” then “SET CODE” will appear at the top of the screen.

Select a 4-digit code

that you would like to use for locking the thermostat.

How do I stop someone from changing my thermostat?

If your staff keep changing your thermostat settings, you could also

install a lock cover over it

. This will stop them from changing the settings. You can buy them online or from select hardware stores for $20.

Can you lock a smart thermostat?

Press your Smart thermostat's ring, this will open the Quick View menu. Turn the ring to go to Settings, and press it to select. Turn the ring until you find Lock, and press to confirm.

Press the ring on Done to lock

your thermostat, or you can select Change if you still need to make any changes.

How do you use an old Robertshaw thermostat?

Step 1: Press and release both the SET and PROG/MAN buttons simultaneously. …
Step 2: Press the up and down buttons to change the time. …
Step 3: Press the “SET” button to set the time. …
Step 4: Set the day of the week. …
Step 5: Press the “SET” button to set the day of the week.

How do you unlock a Stelpro thermostat?

To activate or deactivate this mode, the thermostat must first be set in Day mode. Then,

simultaneously press down both buttons for 3 seconds until the backlight blinks

. Release the buttons. The night light mode will be activated (or deactivated if it was previously activated).

Is there a reset button on a White-Rodgers thermostat?

The most common method of resetting the White-Rodgers Thermostat is by

pressing down on the Up or Down arrow and the Time button at the same time until the display goes blank on your White-Rodgers Thermostat

. This usually takes 15 seconds.

How do you reset a White-Rodgers thermostat?

Ensure the system switch is in Cool, Heat, or Emer.
Press and hold the Up or Down arrow and the TIME button at the same time for 10 seconds.
The display will initially go blank and then reappear.
The thermostat is now reset.

Are thermostat lock box keys universal?

Emerson F29-0222 Universal Thermostat Guard

If installed the right way, it's heavy-duty and not easy to get into without the key. Each box comes with only one key, and

the keys are not universal

; not every lock box is keyed the same, which is important if you are ordered multiples for the same building.

How do I lock my Honeywell thermostat 6000?

Press Menu on the thermostat.

Press + or – to go to LOCK

. Press Select. Press + or – to go to OFF, PART, or ON, and then press Select.

Is there a way to lock a Honeywell thermostat?

On the thermostat home screen, touch Menu. Touch the Arrows until you

see Screen Lock

, then touch Select. Touch the Arrows to choose your screen lock setting, then touch Select. Partial Lock: Only the temperature can be changed.