For square, rectangular or linear fire pits
measure the length and width of the fire pit and add 5 inches to both dimensions
, that will be the minimum size that your wind guard needs to be. For round fire pits measure the diameter of the fire pit and add 5 inches.
What size fire guard do I need?
As a rule of thumb,
add approximately 4′′ to 5′′ to the burner pan size
to determine the overall dimension of the flame guard. The height of the flame guard should be a minimum of 6′′ and a maximum of 8′′, with a preferred height of 6′′ for square or rectangular fire pits and 6′′ to 8′′ for round fire pits.
How big should a fire pit wind guard be?
We recommend using dimensions that are
2” – 2.5” larger than the fire pit opening
. Measure your fire pit! If the fire pit is 12” x 24”, we would recommend a 14” x 26” size. Most windscreens are available in a 6” height.
Do I need a wind guard for my fire pit?
Fire pit wind guards are designed to complement your fire pit or fire table. They protect the flames from wind gusts that can cause sputtering, flickering or extinguish them altogether. … We recommend having
2.5 inches of clearance on each side between
your fire pit opening and the wind guard for optimal performance.
How do you measure a fire pit insert?
When buying a fire pit ring insert, remember that
the diameter measurement provided by the manufacturer
represents the inner diameter of the fire ring, not the edge of the lip. This is the measurement that will represent the size of your stone fire pit’s opening.
What is a flame guard?
Flame guards
help to prevent the flame from blowing around excessively, potentially causing damage
. … Our easy to install flame guards are made of 3/16′′ thick, tempered glass with polished edges, are heat resistant & designed specifically for our fire pits & Drop-In fire pit burner pans.
What does a fire pit wind guard do?
Wind guards are designed to complement your fire pit as well as
prevent the flame from blowing around excessively or blowing out altogether
. Wind guards are also used to prevent loose items from getting too close to the flame.
How do you block a wind from a fire pit?
- Block the Wind with a Tarp. You can create a wall between the fire pit and the wind by hooking bungee cords onto a large tarp. …
- Choose the Right Location. …
- Cover the Pit Fire with a Lid or Wind Guard. …
- Stand around the Fire Pit.
How much glass is needed for a fire pit?
In a natural gas fire pit or fireplace, we recommend using
2′′-3′′ of glass
to cover the burner. In a propane fire pit or fireplace, we recommend using no more than 1′′ of glass to cover the burner (see propane question).
How long does it take for a fire pit to cool down?
It can take anywhere from
15 minutes to an hour or two
for your fire pit to cool down. This is because it takes time for the air temperature around your fire pit to drop. This is due to its high temperature, which will radiate heat outward.
How do you store a fire pit?
Store your fire pit in a dry, sheltered location and
invest in a fire pit cover
to protect it from the inclement weather. Covers can also help reduce the amount of cleaning necessary.
What is a glass wind guard?
A glass wind guard serves as
a layer of protection between the flame and potential wind, little hands, pets, or debris
. The stainless-steel hardware and tempered glass also help reinforce the tall, dazzling flames.
What is wind guard?
: something that gives protection against the wind specifically :
a chimney cowl
.
What is the best height for a fire pit?
A good rule of thumb is to make an above-ground fire pit
12-14 inches tall
. This is a few inches shorter than standard patio furniture seat height. If you want to be able to sit on the edge of the pit itself go a bit higher, 18-20 inches will be comfortable.
How deep should my fire pit be?
Fire-pit depth really depends on what you want and how into your project you’re going to get. For instance, if you just want a basic fire pit, dig
about 6 to 8 inches down
and call it good. You can go deeper if you want, but keep in mind that you don’t want the hole so deep you can’t enjoy watching the fire.
What do you put under a fire pit?
Heat Shields
Regardless of the location of the fire pit, putting a heat shield under the pit will protect the surface from fire and heat damage. Heat shields are fairly portable and easy to use. No assembly is needed; simply place one under the fire pit on a flat surface, and light your fire without any worry.
