The length of the axle is measured
from one end to the other
. For example, the axle with the part number 05720 measures 37-1/2′′ from end to end.
How do you measure for a new axle?
To determine the axle size you will need there are some measurements needed. First, if you are replacing the axle then you can measure the one you have.
Measure from the center of one spring seat to the center of the other spring seat
. Then measure from hub face to hub face.
How do you measure and cut an axle?
Measuring For Cut-To-Fit Axles
All dimensions should be accurate to the
1/16 of an inch
to ensure a proper fit. For the “X” dimension (Driver’s side axle), hook the tape measure on the stud (as shown) and measure to the outside edge of the housing end flange, then add 5 5/8 inches to find the overall axle length.
How do you measure the diameter of an axle tube?
If you can… get a string and wrap it around the axle tube, measure how long that length of string is (that is the circumference obviously). Circumference=2πr and
Diameter
=2r. So, Circumference divided by 6.28=the radius, multiply that number by 2 and you got the diameter.
How are GM axles measured?
With the wheels in position, measure
from the mounting surface of the drivers side wheel to the mounting surface of the passenger side wheel
. This will give you the proper wheel to wheel measurement. Now, subtract the thickness of any disc brake hats or drums and you will have the axle flange-to-flange dimension.
How do you measure a custom Moser axle?
TRACK LENGTH: measure your axle track length by
determining the distance between the center of one tire to the center of the other tire
. A more precise measurement can be made by measuring the distance from one ‘HUB FACE’ to the other.
How do I know my trailer axle size?
How to Determine Weight Capacity of Trailer Axle To find the load capacity for your axle you should look on
the trailer VIN plate or sticker that lists the VIN number
. The weight rating of the axle should be listed on that same plate or sticker.
How do you measure a rear end width?
Using
a measuring tape
, measure from one flange to the other. To ensure an accurate measurement, always measure from end to end where the wheels bolt on to the axle. Record the measurement.
How do you measure a custom axle shaft?
TRACK LENGTH: measure your axle track length by
determining the distance between the center of one tire to the center of the other tire
. A more precise measurement can be made by measuring the distance from one ‘HUB FACE’ to the other.
What is axle length?
TRACK LENGTH: measure your axle track length
by determining the distance between the center of one tire to the center of the other tire
. A more precise measurement can be made by measuring the distance from one ‘HUB FACE’ to the other.
Where do you measure axles from?
The Hub Face measurement can be measured from
the face of your hub or the back of the stud to the same location on the opposite side of the axle
. If you have a 0 offset wheel which most trailer tires & wheels are, a good way to estimate this measurement is center of tire to the center of the other tire.
How do you measure an axle axle?
Hook your
tape measure
on the outside of the hub where your rim touches your hub. Measure across your axle to the exact same spot on the other side. Do not measure to the back side of your hub. Brake Flange Measurement: Hook your tape measure to the outside of the brake flange that is welded to your axle.
Can you cut and weld an axle?
Axles are made of very hard material and welding on them will cause problems. The only way that might work would be to tig with correct filler rod then re heat treat. Best way would be to
have them cut down and resplind
.
Can you weld axle shafts?
Friction welding provides a high-strength, cost-effective solution to join axle shaft sections or an axle to a hub. … The narrow heat-affected zone of the weld area protects the molecular integrity of both components.
How do you narrow a Dana 60 front axle?
Dana Super 60 (Dana S 60)
Larger and thicker diameter steel tubes
(3.75 inches diameter and 1⁄2 in thick)
Larger ring and pinion which increase the contact area and overall strength. Some use larger (“1550”) Universal Joints which increase strength and steering angle.
