How Do You Open An IBM ThinkPad T42?

1. Removing the Optical Drive.
2. Remove the screw holding the optical drive on the underside of the laptop.
3. Push the small slider to unlock position, a tab will automatically pop out.
4. Pull tab to dislodge the optical drive, then pull the drive out.

How do you open a ThinkPad?

First thing to do is a hard reboot.

Remove the battery and unplug the AC adapter

. Then, press and hold the power button for 20 seconds. After that, try booting it up again with the battery and charger.

How do I remove the battery from my IBM ThinkPad?

1. Turn off the IBM ThinkPad. …
2. Turn over the computer. …
3. Slide the battery release latch to unlock the battery. …
4. Loosen the screws securing the service panels to the base of the computer. …
5. Find the backup battery, located next to the RAM and partially hidden beneath the case cover.

How do I reset my IBM ThinkPad T42?

Once the “ThinkPad Recovery Menu” appears,

press the “F11” key

to start the recovery and restore process. Follow the on-screen prompts to restore the ThinkPad T42's hardware settings and software to factory defaults. When prompted to do so, press any key on the keyboard to restart the laptop.

How do I remove hard drive from IBM ThinkPad?

Using the indention on the base cover, use your finger to push the bottom door forward and remove it.

Pull the tab to disconnect then lift

to remove the hard disk drive from its bay. Remove four screws from the hard disk drive. Remove the bracket from the hard disk drive.

Why is my Lenovo laptop not switching on?

Unplug the power and disconnect external devices

. Remove the battery if the battery is removable. For laptops with an internal battery (not removable), use the pin hole reset.

How do I change the CMOS battery in an IBM ThinkPad?

1. Turn off the IBM ThinkPad. …
2. Turn over the computer. …
3. Slide the battery release latch to unlock the battery. …
4. Loosen the screws securing the service panels to the base of the computer. …
5. Find the backup battery, located next to the RAM and partially hidden beneath the case cover.

How do I reset an IBM ThinkPad?

Press the “F11” key after

the ThinkPad Recovery Menu appears. Enable the “Restore Factory Defaults” option and follow the on-screen instructions to reinstall and customize your Windows operating system. The restore process also reinstalls other third-party software included on the computer when you first purchased it.

Where is the reset button on a Lenovo ThinkPad?

The reset button is accessed through

a small hole next to one of the case screw locations on the bottom of the system, near the center of the system

. The reset button hole can be used in the following situations: A unit will not power on, either on battery or AC power.

How do I get into BIOS on IBM ThinkPad?

Press F1 at the Lenovo, ThinkPad, ThinkStation

, or ThinkCentre logo during bootup.

Where is the hard drive located in a Lenovo laptop?

The user's data is supposed to be stored on the separate 2.5′′ slim-7mm hard drive that located in

a bay on the right side of the notebook next to the headphone jack

.

How do I open my Lenovo hard drive?

You'll need to

open File Explorer

to view the drive contents. You can do this by pressing WindowsKey+E. Click This PC and you'll see a list of all your connected drives. You should see your drive there.

What are the problems with Lenovo laptops?

• Audio and Visual: Your microphone and speakers can stop working because you muted them or problems with the drivers or software. …
• Keyboard and touchpad: The keyboard or touchpad can stop responding, or keys can break.
• Performance: Sometimes, the laptop might overheat or slow down to a crawl.

How do you hard reset a Lenovo laptop?

1. Power off your laptop.
2. Disconnect AC adapter (if it's connected).
3. Take off the battery.
4. Press and hold power button several time for several seconds each time.
5. Release power button.
6. Put in back the battery and reconnect AC.
7. Power on.

What if your laptop doesn't turn on?

If your laptop won't power on, even when it's plugged in could have a faulty

power supply, battery, motherboard, video card or RAM

. … Ensure the plug to the power cord is plugged into an outlet and to the computer. Check the laptop's battery and power connector to make sure the connection hasn't come loose.