Apply a good quality marble polish
with a soft cloth
. Rub the polish into the surface to protect and revive its shine. A little buffing should bring out the full luster of your cleaned and restored marble mantel.
How do you restore the shine to a marble fireplace?
- Use a soft microfibre cloth to remove surface dust and dirt.
- Use warm (not hot) water.
- Lightly rub the stain with the cloth, increasing in pressure if the stain is stubborn.
- Regularly rinse the cloth out to keep it clean.
How do you refresh a marble fireplace?
Wipe your marble fireplace with the hot water and mild dish soap 3 or 4 times a year. Also
apply sealant at least once a year
, as this will help keep your marble fireplace clean and resistant to stains. Use any kind of acid to try and clean your marble fireplace, this includes any vinegar or any citric based cleaner.
How do you revamp a marble fireplace?
Use urethane-based primer and topcoat to seal the paint job. Paint the fireplace surround a single, flat color. Alternatively, use a
faux-marbling technique by rolling on two colors
. Allow the base coat to dry, then paint in veins to give the fireplace a new “marble” appearance.
How do you make a marble top shiny?
Dry the marble top with a
chamois cloth
. Buff it to a shine by rubbing the entire surface with the cloth in small circles. Cover the surface with commercial stone polish or marble-polishing paste if you want more shine after buffing with a chamois. If using a spray-on stone polish, wipe with a soft rag.
How do you shine black marble?
- Clean the surface with a quality marble cleaner.
- Sprinkle a small mound of the Etch Remover marble polishing powder on the dull or etched area.
- Add water to the powder to make a thick paste.
- With a clean damp cloth rub the powder in small circles for 15-30 seconds.
What can I do with an old marble fireplace?
- Sell it to the expert you contacted or another reclamation company. Just google “architectural salvage” and your area to see who’s near.
- Sell it online. There are many different sites are available for you to sell your unwanted fireplace.
What will clean marble?
Marble surfaces should be cleaned with
soft cotton cloths
and clean rag mops along with neutral cleaners, mild liquid dishwashing detergent mixed with water, or stone cleaners. If you want to go the easy route, try a commercially available stone cleaner.
How do you clean a burnt marble fireplace?
Try a
paste made out of baking soda and water
if the burn marks are still visible. Apply the paste to the burn mark, let sit for three hours and then wipe away with a clean, damp cloth. Repeat as needed.
What paint can I use on a marble fireplace?
For painting on marble, you’ll need to get your hands on
latex-based or chalk paint
in a single, flat colour. This paint will need to go on top of a three-in-one primer which will include an undercoat and prevent soot and dust coming through from your fire.
Do you need heat resistant paint for a fireplace?
Painting a fireplace requires
specialist heat resistant paint
to create a safe and long-lasting professional finish. … Materials such as brick and stone will withstand heat but will still require a heat resistant paint system.
Is Chalk Paint fire resistant?
Flammability. Both Chalk Paint® and Wall Paint are water-based paints and not flammable. They are not, however, classified as fire retardant paints (BS 476).
They are safe for use on fire surrounds, radiators and hearths
.
How do you fix dull marks on marble?
When a polished marble countertop has only a few etch marks, it’s often possible to restore the shine for $10 $15 by rubbing with a soft cloth and a paste made of water and a marble polishing powder, such as
Miracle Sealants’ Water Ring & Etch Remover
or M3 Technologies’ Majestic Etch Remover.
How do you polish dull marble countertops?
Another traditional method to restore the gleam of marble countertops is to polish them with
baking soda
. Mix three tablespoons of soda with one quart of water and apply it on the surface, then let air dry for several hours.
Can I use car polish on marble?
A new can of car wax works
great on old cultured marble (made from acrylics and other synthetic stuff) and old Formica countertops. The old “Kitchen Wax” TM was often used as a countertop polish, too.
