Brush a waterproof concrete sealer
over the surface of a clean and dry statue. Allow the ornament to dry for at least 24 hours or per the directions on the sealant container. Apply another coat of sealant if necessary to fully cover the concrete. Leave the bottom of the statue unsealed to allow the concrete to breathe.
Should you seal cement statues?
Concrete ornaments can add beauty, practicality or whimsy to a garden — and sometimes all three. Whether a birdbath or bench, gnome or pillar, there’s a concrete garden ornament for any landscape. But because garden ornaments face exposure to the elements, they require sealing lest they crack, chip or mold over time.
What is the best sealer for concrete statues?
Acrylic-based sealers
coat concrete with a thin covering and protect especially well against water, which benefits garden ornaments in wet areas prone to mold growth. Polyurethanes and epoxies protect with a thick layer but do not breathe well and can trap water beneath the surface.
How do you weatherproof outdoor statues?
Protect your work surface with a dropcloth and lay the item flat.
Apply one light coat of polyurethane to the exposed surface
, and then allow it to dry. Flip the item over and apply a light coat of polyurethane to the opposite side. Repeat the process a second time for added protection.
How do you seal painted concrete statues?
Cover the statue with a UV/water sealant
to protect the paint from the elements. Place the concrete statue on a ventilated surface, such as gravel or rock, when you apply the sealant. Leave it there for 24 hours to dry. Sealants make paint last longer and prevent it from flaking off.
How do you smooth concrete statues?
The sculpture may be
sanded with wet/dry sandpaper
or an oscillating grinder with a diamond grinder pad. You can also use a rotary tool with sanding accessories suited for concrete. During sanding, move the sandpaper, grinder or rotary tool tip back and forth in a smooth motion.
What is a good concrete sealer?
- BEST OVERALL: Foundation Armor AR350 Wet Look Concrete Sealer.
- BEST BANG FOR THE BUCK: Rainguard Micro-Seal Penetrating Concrete Sealer.
- BEST PENETRATING: MasonryDefender Penetrating Concrete Sealer.
How do you protect outdoor decorations?
Create water barriers on your outdoor decorations with
waterproofing paint, clear waterproof sealer or a block and wall sealant
. Whether your outdoor decorations are made out of wood, metal, concrete or acrylic, take a little time to protect them from the elements so you can enjoy them as long as you like.
How do you protect outdoor plaster statues?
- Sand the surface of the plaster statue lightly with fine-grit sandpaper. …
- Cover the entire statue with a light coating of linseed oil, using a paintbrush.
Are resin statues weatherproof?
They have a greater strength than some of the other materials that can be cast. And, the resin statues are suitable for indoor and outdoor use. … It is important to note that while resin statues and sculpture do well in rain and can handle temperatures above freezing,
they are not as resistant to harsh winter conditions
.
How do you restore a concrete statue?
Epoxy is best for concrete repair
. Cement garden statues are available in a wide range of styles and shapes and are a way to add interest to a landscape. … If your beloved garden statue had developed some flaws, you can repair it using basic concrete repair materials.
How do you paint outdoor concrete statues?
- Clean the statue with the rag, soap and water, then let the statue dry. …
- Use the paint brush to apply a solid coat of masonry primer to the statue. …
- Using your second paint brush, paint the statue with the acrylic paint. …
- Spray the statue with the can of varnish to add a shine to your statue, then display it.
Can you spray paint concrete statues?
Aerosol spray paint is great for concrete
statues because it’s thin and can be applied in very fine layers, so it doesn’t muddle delicate details. You can achieve similar results using standard house paint if it’s thinned with water. As with sprays, choose an exterior acrylic latex paint rated for outdoor applications.
How do you waterproof a concrete statue?
Brush a waterproof concrete sealer
over the surface of a clean and dry statue. Allow the ornament to dry for at least 24 hours or per the directions on the sealant container. Apply another coat of sealant if necessary to fully cover the concrete. Leave the bottom of the statue unsealed to allow the concrete to breathe.
Can you make your own statues?
You can make a statue starting with a
wire frame
, cast one with a mold or sculpt a small, free form, concrete shape. Concrete is a mixture of an aggregate, cement, and water. … You can pour or pack concrete into or around just about anything. Immortalize your favorite (but worn out) pair of high tops.
How do you shape hardened concrete?
- Remove all imperfections on the surface.
- Vacuum up all debris and apply the adherent.
- Apply a new layer of concrete.
- Sand the surface and wash the concrete.
- Apply a layer of vitrifier to protect the concrete.
