How Do You Remove The Drive Shaft On A Chevy Silverado?

by | Last updated on January 24, 2024

, , , ,

Can you drive a 4WD without a front or rear driveshaft?

Yes

, this is possible, if you drive a traditional 4WD with a lockable center differential. Remove the damaged drive shaft and lock the center differential. … You will be able to safely drive the vehicle in front-wheel drive or rear-wheel drive mode.

How do you remove a drive shaft?

That's very difficult to answer due to the multiple variables involved in removing and replacing hard to access components such as the center driveshaft on a front wheel drive vehicle like your Edge. However, in general, this type of job can often be completed

in one business day

; or less than 8 service hours.

How do you remove a front drive shaft?

You

can drive the vehicle indefinitely

in this mode with one driveshaft removed. Never drive with one driveshaft removed unless the CDL is locked; you can burn up the viscous coupler in vehicles so equiped, but also the vehicle will roll even if the transmission is Park (unless the Emergency brake is engaged).

Can I drive Silverado without front drive shaft?

Can you drive a 4WD truck without a front or rear driveshaft?

Yes

, this is possible, if you drive a traditional 4WD with a lockable center differential. Remove the damaged drive shaft and lock the center differential. … You will be able to safely drive the vehicle in front-wheel drive or rear-wheel drive mode.

How long does it take to remove a drive shaft?

That's very difficult to answer due to the multiple variables involved in removing and replacing hard to access components such as the center driveshaft on a front wheel drive vehicle like your Edge. However, in general, this type of job can often be completed

in one business day

; or less than 8 service hours.

What does a bad driveshaft sound like?

Generally speaking, a bad drive shaft is going to create a kind of

rattling or clunking sound

. You may also hear sounds that are like a high-pitched squeaking or a scraping noise of metal on metal. All of this will originate from underneath your car, rather than in the engine compartment.

Can you put a drive shaft in wrong?

If they split the shaft and not re install it correctly,

they will throw the shaft out of balance

and cause an uncomfortable vibration. One piece shaft guys have the slip yoke in the t-case, so they dont have to worry about any of this.

Can you remove front drive shaft and still drive?

You

can drive the vehicle indefinitely

in this mode with one driveshaft removed. Never drive with one driveshaft removed unless the CDL is locked; you can burn up the viscous coupler in vehicles so equiped, but also the vehicle will roll even if the transmission is Park (unless the Emergency brake is engaged).

What happens if drive shaft breaks while driving?

If an axle begins to fail while driving, your car will start to pull to one side as one wheel loses power. When the axle breaks

completely its corresponding wheel will no longer turn

and although the engine may still run, the car won't move.

Can you drive with a broken front differential?

Just as the brakes, engine, and steering wheel are all a crucial part of your car, so is the front axle. … Without the front axle, the wheels can't move. So, when it is broken, it needs a

front axle replacement for the

car to be drivable again.

When should you replace driveshaft?

While

there is no set lifespan of a driveshaft

, it typically can last about 75,000 miles. Keep in mind depending on the vehicle, and wear and tear you may get much less or much more.

Is a drive shaft expensive to replace?

You can expect the parts cost to be anywhere from

$320 to $750

, while the labor costs are only around $150 to $190. If you have a rear wheel or four wheel drive vehicle which has a long drive shaft to power the rear wheels, then expect to pay somewhere in the range of $600 to $2,000.

What causes drive shaft failure?


Improper stiffness matching between the left and right smooth shafts

, which results in a larger torque transmitted to the right spline, is the root cause of the drive shaft failure.

What does a driveshaft vibration feel like?

A common symptom of a failing driveshaft is

an intense shaking coming from underneath the vehicle

. Worn out u-joints or bushings can cause the driveshaft to vibrate. … Vibrations caused by tire balance issues are speed sensitive while driveshaft vibrations aren't.

How do you diagnose a bad u-joint?

  1. Squeaking noise when starting to move (forward or reverse) …
  2. “Clunk” with a ringing sound when shifting from Drive to Reverse. …
  3. Vibration felt throughout the vehicle while moving forward at speed. …
  4. Transmission fluid leaks from the rear of the transmission.

How long can you drive with a bad u-joint?

A car with a bad U-joint will

break down in a few hundred miles at the maximum

. But if you have a bad U-joint and you are having a transmission fluid leakage, you should not drive your car since the U-joint may break down anytime and will cause damage to the brake line, drive shaft, transmission line and other parts.

David Evans
Author
David Evans
David is a seasoned automotive enthusiast. He is a graduate of Mechanical Engineering and has a passion for all things related to cars and vehicles. With his extensive knowledge of cars and other vehicles, David is an authority in the industry.