Rotate the jack handle with the wheel nut wrench counterclockwise to lower the spare tire to the ground.
Rotate the tire retainer in
the center of the spare tire in a counterclockwise direction until the retainer separates from the tire, then pull the tire from under the truck.
How do you get the spare tire off a 2011 Ford Ranger?
Rotate the jack handle with the wheel nut wrench counterclockwise to lower the spare tire to the ground.
Rotate the tire retainer in
the center of the spare tire in a counterclockwise direction until the retainer separates from the tire, then pull the tire from under the truck.
How do you get the spare tire off a Ford Ranger without tool?
- Get under the truck.
- Pull off the guide tube.
- Pull out the key with pliers.
- Insert crank into the new hole.
- Turn the crank counterclockwise to lower the tire.
How do you lower the spare tire on a 2019 Ford Ranger?
The lock is located between the rear bumper and the tailgate, Slide the square end of the jack handle through the access slot. Rotate the handle until it engages with the spare tire's lift cable.
Rotate the jack handle with the wheel nut wrench counterclockwise to
lower the spare tire to the ground.
Where is the jack located on a Ford Ranger?
Ford Rangers hold the jack
inside a plastic compartment found just underneath the passenger seat
. The jack can be found in a plastic box with a black lid. To reach it, unscrew the black cover and remove it.
How do I get my spare tire off my truck?
- Step #1: Get Under the Truck. …
- Step #2: Locate and Pull off the Guide Tube. …
- Step #3: Put a Wedge Between the Tire and the Vehicle. …
- Step #4: Use Pliers to Pull off the Key. …
- Step #5: Lower the Tire to the Ground. …
- Step #1: Fix the Socket to the Extender. …
- Step #2: Pass the Socket Through the Back Bumper.
What is the tool called that lowers the spare tire?
| List Price: $99.99 Details | Price: $68.29 | You Save: $31.70 (32%) |
|---|
How do you get a spare tire lock off without the key?
- Step 1: Look for the damn key.
- Step 2: Figure out what size socket is ‘close,' make sure it's a 12-Point.
- Step 3: Smash that socket onto the locking lug nut with a hammer.
- Step 4: Apply leverage.
- Step 5: Revel in your success! …
- Step 6: Get the locking lug nut out of your socket.
How do you change a TYRE on a Ford Ranger?
To remove them you will just have
to pry the wheel cover with a flat screwdriver e.g. on
the wheel cover to remove it from the rim of your Ford Ranger. Once done you should be capable to remove it by pulling it towards you. It is just fixed by small plastic lugs that have just lodged in the rim flange.
How do you jack up a 2020 Ford Ranger?
Place your car jack
at the right lifting points
. The front and back have two lifting locations, and placing the jack anywhere else could cause damage to the vehicle. In the front, place the car jack under the lower control arm's projection or the rear axle housing.
Where is the jack on a 2019 Ford Ranger?
Ford Rangers hold the jack
inside a plastic compartment found just underneath the passenger seat
. The jack can be found in a plastic box with a black lid. To reach it, unscrew the black cover and remove it.
How do you get the spare tire off a Ford Everest 2018?
Locate the
guide tube under the vehicle
. This is a long, black, plastic pipe near the tire. Twist the tube back and forth while pulling it in the direction of the vehicle's rear to reveal the drop mechanism for the spare tire.
Does Walmart Automotive do tire alignments?
Unfortunately,
Walmart does not offer wheel alignment services as of 2021
. Customers can instead visit stores like Mr. Tire, Big O Tires, Goodyear, Tire Discounters, and others to get their wheels aligned for $50-$100. Walmart does also provide many other auto services, but wheel alignments are not one of them.
Where do you jack up a truck?
On four-wheel-drive trucks, place the jack
under the front differential
. Always place the front jack stands directly under the frame on any type of truck. Support the rear of the truck with jack stands under each axle.
