How Do You Replace Lowering Springs?

1. Jack the vehicle up and support it with jack stands.
2. Remove the first shock/strut. …
3. With the strut off, use your spring compressors to compress the stock spring.
4. Use your impact wrench to remove the top nut and cap from the shock/strut.
5. Remove the spring with the compressors attached.

How much does it cost to replace lowering springs?

Another option to lower your vehicle’s ride height is to replace the stock springs in the suspension with lowering springs. These are shorter springs that lower your car by one to three inches. Lowering spring kits go for anywhere

between $100 and $700

. A professional installation may cost an additional $200 to $800.

Do lowering springs need to be replaced?

It is generally

recommended that you change the shocks/struts when you use lowering springs

. … Lowering springs are shorter than stock springs so the shocks and struts wind up in a new normal position that is more like the middle of their travel when used with stock springs.

How do you install lowering springs?

1. Jack up the rear of the car and put it on car stands.
2. Remove the rear wheels.
3. Remove the shock nuts and bolts. (You can locate them by referring to the owner’s manual.) …
4. Remove the springs.
5. Install the new lowering springs.
6. Replace the shock nuts and bolts.
7. Replace the rear tires [source: Do It Yourself].

How long does it take to replace lowering springs?

takes

about 4-6 hours on the parking lot

and 2-3 hours on the lift.

Why lowering springs are bad?

Poorly done or extreme lowering

can cause suspension and steering parts to contact each other

, the wheels or the tires. It could also cause tires to rub the body during turns or going over bumps.

Are Lowering springs good for daily driving?

If you want to lower your daily driver, then look to install lowering spring instead. Lowering spring

will lower your car

and still provide you with the handling improvement (although not as much). However, this handling improvement is usually enough if you are driving on the street with your daily driver.

Can you fit lowering springs at home?

The process is not difficult, so anyone with garage access and a little know-how can accomplish this modification. Since lowering springs are

designed to work

with your existing factory suspension, they can simply replace your coil springs.

Can you lower your car with stock springs?

Many vehicles, especially compact cars, use coil spring suspension, and lowering them is simply a case of replacing the stock coil springs with shorter ones that leave the vehicle at a lower height when at rest.

Is it hard to replace coil springs?

Installing replacement coil springs on your car requires the right technique and some specialist equipment.

The job is not extremely difficult

, but it is risky. If you observe some sensible safety precautions, you stand a better chance of success.

How long does it take to replace rear coil springs?

But, if you know what you’re doing, you should be able to do it in

<4 hours

(from the time you pull the car into the garage until you pull it out). The fronts will take the longest, and the rears can be done in about 15-30 minutes per side, or less.

How much does it cost to replace coil springs?

When you take your truck to a mechanic to get a replacement coil spring, you may find yourself spending an average of

$350 to $422

. The actual price will vary depending on your vehicle, location, type of spring replaced and whether you need additional services.

How much would a garage charge to change springs?

Replacing garage door springs costs

$150 to $350 on average

. The springs alone typically run $30 to $75 each but you may find them as low as $15 a piece and up to $100 each. Commercial grade springs can run $300 or more.

Do lowering springs ruin ride quality?

Lowering springs will make my ride feel

more harsh

. False. Most lowering spring sets are designed to maintain most of your car’s factory suspension travel distance and are about 15% higher in spring rate design to preserve ride quality. You will have a harsher ride from stiffer shocks, otherwise known as HD models.

Are Godspeed lowering springs good?

5.0 out of 5 stars

Good, affordable, comfortable

. These springs are amazing. If you’re looking for a budget-friendly upgrade on your Focus ST without sacrificing comfort, these are the springs to go to. They add a nice not-so-low look on your car while maintaining a comfortable ride.

Do lowering springs hurt your car?

Lowering springs also

change the geometry of your wheel/tire fitment

. If it’s not done right, you can expect both accelerated and uneven tire wear. Your car could also bottom out over speed bumps and be even tougher to get up inclines, like your driveway, without scraping your bumper.