How Do You Reset The Airbag Light On A 1998 Nissan Frontier?

1. Turn ignition switch “ON”.
2. After “AIR BAG” warning lamp lights for 7 seconds, turn ignition. switch “OFF” within 1 second. Remove key.
3. Wait more than 3 seconds.
4. Repeat steps 1 to 3 three times.
5. Turn ignition switch “ON”. SRS is now in Diagnosis mode.
6. “ AIR BAG” warning lamp operates in Diagnosis mode.

How do you reset the airbag light on a Nissan Frontier?

1. Insert the key into the ignition and turn the key to ON.
2. Notice that the light will stay on and then start blinking. …
3. Wait 5 seconds. …
4. Wait 5 seconds and repeat step 1. …
5. When you are complete, you should have inserted the key and removed it for a total of 6 times.

How do you reset the airbag light on a 1999 Nissan Frontier?

Open the driver’s door, insert the key and turn to ON (do not start), then

press the door-ajar/light switch below the door jamb

at least 5 times within 7 seconds. The light will begin to flash a pattern of 3 seconds on, then a series of 1/2-second flashes, then 3 again, etc.

How do I reset my airbag light manually?

1. Put the key into the ignition and turn the switch to the “on” position.
2. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
3. Repeat Steps 1 and 2 two more times.

How do I turn off the flashing airbag light?

1. Turn on the ignition switch with your car key. …
2. Wait for the airbag warning light to turn off. …
3. Turn the ignition switch of your car back off for a little longer than three seconds.
4. Repeat steps 1 through 3 twice to make three times total.

What does it mean when the airbag light is flashing?

Your car will tell you by illuminating or flashing the airbag warning light on your dashboard or computer display. When this light is on, that means

your airbags are deactivated

. It means they will not deploy properly if you get into an accident.

What can cause the airbag light to come on?

The most common cause for the airbag light coming on is that

the airbag system is deactivated or turned off

. … There may be an issue with the crash sensors or other airbag component. Alternatively, the sensor in the passenger seat that determines whether that airbag should be active or not may be faulty.

How much does it cost to reset the airbag light?

This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be

up to about $600

.

Can you sell a car with airbag light on?

You can sell it

, but if someone asks about the airbag light, you should tell them what you know about it.

Is it safe to drive with airbag light on?

Is it safe to drive with an SRS light on? … It doesn’t necessarily mean that the car isn’t safe to drive but it’s like playing with fire if you do. When this light is on it means your

safety system isn’t working at 100%

and in some cases, it could mean that your airbags are disabled and will not deploy in an accident.

Can a blown fuse cause the airbag light to come on?

Blown fuses can definitely cause the airbag light to come on

. … When the airbag system is malfunctioning, a mechanic or auto parts store should be able to read the code that the system is putting out which will give them a clue as to what particular problem the airbag is having.

How do I know if my airbag sensor is bad?

You can easily tell if the sensor is functioning

if the airbag warning light on the dashboard is illuminating every time you start the vehicle

. But, if the airbag warning light stays illuminated after starting the vehicle, this is an indication of an airbag sensor problem.

Will disconnecting battery reset airbag light?

Often, all it takes to get rid of that pesky warning light is to reset your airbag sensor. …

Remove the terminal clamp and leave it disconnected for 5-10 seconds

to allow the airbag sensor to reset. Then reconnect the battery terminal and turn the vehicle on. With a bit of luck, the light will stay off.

What do you do when your airbag light comes on?

The best thing to do if your airbag light has come on is to

take the vehicle to a mechanic right away

. A mechanic can help you to deal with the airbag light by examining the system with the help of the car diagnostic internal system.

What does the airbag light look like?

The SRS warning light on the dashboard usually looks like a side view of a person sitting in a seat with a seat belt on, with

a large circle (the airbag) in front of the person

. It will normally light up briefly each time you start your vehicle, and then go off.

Can you reset airbag light with OBD2?

OBD2 scanner can read fault car code and reset SRS. … However, you

need to buy an OBD2 scanner that is capable of reading SRS light codes and resetting it

. There are many OBD2 scanners on the market. They work with 1996 and newer models and can solve not just SRS issues but other basic and advanced problems as well.