Turn the ignition to the ON position. Do not start the engine. Press and release the “Select/Reset” stem button on the instrument panel to toggle the options until the “
Hold Reset For Setup Menu
” option appears. Press “Select/Reset” to toggle the options until the “Hold Reset if New Oil” option appears.
How do you reset the oil change light on a Ford Explorer?
Turn the ignition to the ON position. Do not start the engine. Press and release the “Select/Reset” stem button on the instrument panel to toggle the options until the “
Hold Reset For Setup Menu
” option appears. Press “Select/Reset” to toggle the options until the “Hold Reset if New Oil” option appears.
How do I reset my oil life manually?
- Press and hold the reset button.
- Turn the ignition back to the ON position while holding the reset button.
- Watch the oil change or maintenance light carefully. …
- Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
How do you reset the oil light on a 2009 Ford Explorer?
Turn the ignition to the ON position. Do not start the engine. Press and release the “Select/Reset” stem button on the instrument panel to toggle the options until the “
Hold Reset For Setup Menu
” option appears. Press “Select/Reset” to toggle the options until the “Hold Reset if New Oil” option appears.
How do you reset the oil life on a 2011 Ford Explorer?
Turn the ignition to the ON position. Do not start the engine. Press and release the “Select/Reset” stem button on the instrument panel to toggle the options until the “
Hold Reset For Setup Menu
” option appears. Press “Select/Reset” to toggle the options until the “Hold Reset if New Oil” option appears.
Do you have to reset oil life?
Do not reset the oil light unless you have actually changed the oil
. The light is there to tell you when it’s time to change the oil. Resetting the light without changing the oil may cause you to miss an oil change, which can damage your engine.
Why is my change oil light still on?
If your oil light stays on even after changing your engine oil, you’re going to want to
check the sensor first to rule out a malfunctioning sensor as the cause
. … The oil pump may not be circulating enough oil to keep the engine’s parts lubricated and functioning properly, which can in turn cause multiple engine issues.
What does it mean when car says oil change required?
What does it mean if the message center says “oil change required”? …
If the oil is allowed to go beyond the end of its life
, it loses its ability to lubricate (called viscosity), and it builds up debris and can cause damage to your engine. Your car is designed with an oil change reminder system.
How do you reset the oil light on a 2012 Ford Explorer?
To reset the oil level warning or maintenance light in your 2012 ford explorer vehicle,
turn the ignition key to the “on” position and depress the gas pedal slowly three times
. Release and start your vehicle and oil light should indicate a reset.
What is Ford Intelligent oil life monitor?
The available Intelligent Oil-Life Monitor
calculates oil change service intervals based on vehicle use, operating conditions, and time
since last oil service. The Intelligent Oil-Life Monitor must be reset after each oil change.
How much oil does a 2011 Explorer take?
Capacity:
6 quarts
(with filter)After refill check oil level.
How many miles will 5 oil life last?
Hi There, Your oil life percentage is generally an estimated time designed to prompt the operator of the vehicle to have the oil changed as soon as possible. 5% is generally not something to be concerned about, but you should consider having the oil changed in the next
1,000 miles or less
.
What does it mean oil life 15?
You’ll see “Oil Life” with a percentage number on your dashboard. … So at 40%, your oil still has 40% of its lifetime remaining to do its job before it needs to be replaced. At 15
%, your oil still has 15% lifetime remaining
, and so on.
How do I turn my check engine light off?
The simplest most straightforward way to get rid of the check engine light is
to drive it for a little bit
, and the light will turn off by itself. Once you drove your car for a couple of days (e.g., usually three days), the check engine light should be gone.
What are signs of oil pump going out?
- Low Oil Pressure.
- Increased Engine Temperature.
- Hydraulic Lifter Noise.
- Noise from the Valve-Train System.
- Noise at the Oil Pump.
- Stop Driving.
- Check the Oil Pressure Measurement Unit on the Engine.
- Check the Engine Oil Port Pressure Using A Gauge.
Why would my oil light come on if I have oil?
What does it mean when the oil light comes on? When the oil light on your dashboard comes on, it might mean
your vehicle has low oil pressure
. This drop in oil pressure could be a sign of a few things: you are low on oil, your oil is dirty, or you have an oil leak.
