How Do You Reset The Oil Light On A 2008 Volvo S40?

1. Press and hold trip reset button,
2. turn on the ignition,
3. wait for the yellow warning light to start blinking,
4. release the button and wait for confirmations sound,
5. turn off the ignition,
6. turn the ignition back on to check if the service message is gone.

How do you reset the oil light on a Volvo S40?

1. Press and hold trip reset button,
2. turn on the ignition,
3. wait for the yellow warning light to start blinking,
4. release the button and wait for confirmations sound,
5. turn off the ignition,
6. turn the ignition back on to check if the service message is gone.

How do you turn off the service light on a Volvo S40?

1. Hold down the odometer button.
2. Turn the ignition so all the lights come on.
3. Keep holding the odometer down for 30 secs or until the service light starts flashing.
4. Release the odometer button.

How do you reset the check engine light on a 2007 Volvo S40?

Turn the Volvo’s ignition key to the “II” position in

the ignition. Wait for the light on the diagnostic tool to stop flashing. The codes on your Volvo’s electronic control unit should be cleared at this point and the check engine light will reset itself.

How do you reset the maintenance light on a 2009 Volvo?

1. Turn ignition switch to position I.
2. Press and hold the odometer reset button.
3. Turn ignition switch to position II.
4. After Service light flashes, release odometer reset button.
5. Turn ignition off.
6. Turn ignition back on to confirm reset.

How do you turn off the maintenance light on a Volvo XC70?

1. Turn ignition switch to position I.
2. Press and hold the trip odometer reset button.
3. Turn ignition switch to position II, while continuing to press trip odometer reset button.
4. Wait for 10 seconds.
5. Release the reset button when the information lamp starts to flash.

How do you reset the oil light on a Volvo S60?

1. Turn your Volvo S60 key to the first position or quickly press the START/STOP button.
2. Press and hold the OK/Reset button. …
3. Turn your key to the second position or press the START/STOP button again. …
4. When the info light blinks, stop holding the OK/Reset button.

How do you reset the check engine light on a Volvo XC60?

Some owners of the Volvo XC60 have been able to reset the “check engine” light

by turning the key to the “on” position” and depressing the odometer button for several seconds

. When the warning flashes twice, try staring the engine and observe whether it has cleared.

How do you reset the maintenance light on a Volvo XC60?

First place the key in its slot and with Your foot off of the brake pedal, press the engine start button one time. After that You need to press

and hold the trip reset button

and the ok button which is located on the left of the steering wheel.

Can you drive a Volvo with check engine light on?

If the cause is a minor issue, such as a

loose gas cap, it should be safe to drive

. This is frequently indicated by a persistent glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more helpful problem.

How do you reset the oil light on a 2010 Volvo C70?

Press

and hold the odometer trip 1 reset button

and wait for the odometer to set to zero. Step 3. With the trip reset button still pressed, turn the key forward to position 2. release it immediately.

How do you reset the oil light on a 2012 Volvo C70?

1. Turn the ignition switch to position I (ACC)
2. Press and hold the OK button on the turn signal arm.
3. Continue to hold OK button and turn the ignition switch to position II (RUN)
4. Wait about 10 seconds and release the button once the information light begins to flash.

How do you reset the service reminder on a Volvo C70?

Turn ignition to position I (ON.) Press

and hold in the reset button

for the trip odometer. Turn the key to position II within 2 seconds, while continuing to press trip odometer reset button. Hold the reset button for the trip odometer pressed in until the original value has been reset.

How do you reset the oil light on a 2007 Volvo S80?

1. Turn the ignition key to the position I. …
2. Press the TRIP button repeatedly until you see Trip 1/ T1. …
3. Press and hold the TRIP button, then turn the ignition key to the position II without starting the engine.

Why does my Volvo say Book time for maintenance?

The sole function of Volvo’s

Service Reminder Indicator

is as a reminder for the driver to take their car in for an oil change or other routine maintenance. … Check the owner’s manual for more information about what oil is recommended for your vehicle.

How do I reset my Volvo on Call service required?

1. Tap the tab on the upper edge of the display (you will see Settings or Owner’s Manual)
2. Select Settings.
3. Select System.
4. Select Global Reset.
5. Select Factory Reset.
6. Select OK.

How do you reset the oil light on a 2007 Volvo XC70?

1. Confirm that you have the trip computer in T-1 mode;
2. Put the car key, and turn the ignition to position I ;
3. Press and hold trip meter reset button until the trip meter reads “0.0”. …
4. With the trip meter reset button still pressed, turn the key to position “II”;

How do you reset the check engine light on a 2007 Volvo xc90?

1. key in I position.
2. hold trip meter in.
3. turn ignition to II position.
4. wait until service icon flashes twice.
5. release trip odometer button.