How Do You Reset The Oil Light On A 2009 Ford F350? - Fixanswer

Switch the ignition ON, do not start the engine. Press and release the SELECT/RESET button to display “OIL LIFE XXX% HOLD RESET = NEW” . Press and hold the SELECT/RESET button for two seconds and release. Oil life is set to 100% and “OIL LIFE SET TO 100%” is displayed.

How do you reset the oil life on a 2008 Ford f350?

Switch the ignition ON, do not start the engine. Press and release the SELECT/RESET button to display “OIL LIFE XXX% HOLD RESET = NEW” . Press and hold the SELECT/RESET button for two seconds and release. Oil life is set to 100% and “OIL LIFE SET TO 100%” is displayed.

How do you reset the oil change light on a Ford Super Duty?

Step 1 – Insert key into ignition. ...
Step 2 – Access the Setup Menu. ...
Step 3 – Press the “reset” button. ...
Step 4 – Turn off the ignition.

How do you reset the oil light on a 2015 f350?

First, insert the key and put the ignition on. ...
Go to the main menu. ...
Find the SETTINGS menu. ...
Scroll to the VEHICLE menu. ...
Select OIL LIFE RESET. ...
Press and hold the OK button.

How do you reset the oil light on a 2012 Ford f350?

Turn the ignition to the “RUN” position.
Use the controls on the left of the steering wheel to scroll through menu.
Press the up and down arrow buttons to select “SETTINGS” and then “VEHICLE”.
Select “OIL LIFE RESET %” and then “OK” to reset.

How do you reset the oil life on a 2010 Ford f150?

Use the arrow buttons on the left side of the steering wheel to to scroll all the way left to the main menu. Use the arrows to highlight “Display Mode“, then use the right arrow to select it. Scroll down to “Engine Information“. Press and hold the “OK” button for about 3 seconds , and the oil life will reset.

How do I reset my Ford oil change?

Press and hold the trip/reset button until the display reads “OIL LIFE SET TO 100%.” Turn the ignition to the “OFF” position. Start the engine and verify that the oil change required message is no longer displayed.

How do I reset my oil Life Light?

Turn the ignition back to the ON position while holding the reset button . Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.

How do you reset the oil light?

Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.

How do you reset the oil light on a 2011 Ford f350?

First, insert the key and put the ignition on. If your vehicle has an ignition button, press the START/STOP button two times without step on any pedal.
Go to the main menu. ...
Find the SETTINGS menu. ...
Scroll to the VEHICLE menu. ...
Select OIL LIFE RESET. ...
Press and hold the OK button.

How do you reset the oil life on a 2011 Ford f350?

First, insert the key and put the ignition on. If your vehicle has an ignition button, press the START/STOP button two times without step on any pedal.
Go to the main menu. ...
Find the SETTINGS menu. ...
Scroll to the VEHICLE menu. ...
Select OIL LIFE RESET. ...
Press and hold the OK button.

How much oil does a 2010 Ford f150 take?

Capacity: 7 quarts (with filter)After refill check oil level.

How do I do a factory reset?

Swipe in from the right edge of the screen, tap Settings, and then tap Change PC settings. ...
Tap or click Update and recovery, and then tap or click Recovery.
Under Remove everything and reinstall Windows, tap or click Get started.
Follow the instructions on the screen.

What kind of oil does a 2010 Ford f150 take?

Ford recommends Motorcraft 5W-20 synthetic blend motor oil for the 2010 F-150. The 4.6L (281 ci) V8 engine uses 6 quarts of oil, while the 5.4L (330 ci) V8 engine uses 7 quarts of oil.